Swiid Cord Switch (SWI_ZCS1) is the first (and at this time still the only) cord switch in the Z -Wave® ecosystem which is small enough to be compared to a regular cord switch. It can be used both manually like any ordinary cord switch and remotely by Z -Wave®.
The SWI_ZCS1 is a z-wave cord switch for lamps. The device can be used either as a normal cord-switch or be switched via z-wave command. In addition to direct associating devices with each other, the switch can also respond signals in the Z-Wave network. For example he can be used with a motion sensor. An association of several lamps is also possible but this depends on the respective controllers.
Device Type: BINARY POWER SWITCH Power
Input: 230V ± 10% - 50Hz
Max. Power: 660W
EU Norms: EN 61058-2-1:2011 & EN 55015
Protection index: IP20
Size: 84 x 32 x 29 mm
Radio protocol: Z-Wave® (SDK 4.55)
Radio frequency: 868,42 MHz (EU)
Transmission dist.: Max. 30m indoors depending on construction materials
Working temp: 0 – 40°C
On/Off signal: Blue LEDs
Power consumption: < 0,08W