Aeotec Smart Micro Switch

Lighting

Aeotec Smart Micro Switch

  • Vendor:Aeotec
  • Category: Lighting, Z-Wave
Availability: In Stock
$90.00
Compare

The Aeotec Smart Micro Switch is a low-cost Z-Wave switch specifically designed to enable Z-Wave control (on/off) of existing wall switches. It can also report immediate wattage consumption or kWh energy usage over a period of time to a Z- Wave gateway or controller when requested. If this function is supported by the gateway/controller, the energy consumption will be displayed in the user interface of the gateway/controller. The wireless module is powered from the mains supply and is a three-wire design which requires a neutral connection. In the event of power failure, non-volatile memory retains all programmed information relating to the units operating status.

  • On/Off via Z-Wave or manual control
  • Can be controlled by any Z-Wave controller (e.g. Fibaro, Vera, Zipato)
  • Metering of current consumption (W) or accumulated consumption (kWh)
  • 868.4 MHz radio frequency - for use in 47 member countries of CEPT (including whole of EU), plus China, Singapore, South Africa & UAE
  • Installs behind your existing light switches: no need to replace
  • Switch your lights or other non-inductive load on and off from your Android or iOS smartphone or tablet
  • Easy network inclusion: small network inclusion push button & status indicator LED

Power Supply: 

110V, 60Hz and 230V, 50Hz

Frequency: Z-Wave (868.42MHz)

Max Load: 10A

Range: up to 50m (outdoors) and 30m (indoors)

Dimensions (LxWxH): 48 x 49 x 18 mm

3-wire System: Neutral required