Aeotec Micro Dimmer
The Aeotec Micro Dimmer is a ZWave light dimmer specifically used to enable Z-Wave command and control (on/off/dim) for existing in-wall dimmers. The wireless module is powered from the mains supply and is a three-wire design which requires a neutral connection. In the event of power failure, non-volatile memory retains all programmed information relating to the units operating status.
- On/Off/Dim control via Z-Wave, manual Wall Dimmer and/or built-in button
- Can be controlled by any Z-Wave controller (e.g. Fibaro, Vera, Zipato)
- 868.4 MHz radio frequency - for use in 47 member countries of CEPT (including whole of EU), plus China, Singapore, South Africa & UAE
- Small form factor that fit in most gang boxes worldwide
- Switch your lights or other non-inductive load on and off from your Android or iOS smartphone or tablet
- Easy network inclusion: small network inclusion push button & status indicator LED
Power Supply: 110V 60Hz to 230V 50Hz
Frequency: Z-Wave (868.42MHz)
Max Load: 2.5A
Range: 15 meters
Dimensions (LxWxH): 52 x 49 x 18.5 mm
3-wire System: Neutral required
Related Products
Quick View
{"id":737728921697,"title":"MCO Home Touch Panel Switch (Four buttons)","handle":"mco-home-touch-panel-switch-four-buttons","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cmeta charset=\"utf-8\"\u003e\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eThe\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eMCO Home Touch Panel Switch Gen5 \u003c\/strong\u003eis a wall switch with 4 integrated switch relays for UK standard wall boxes allowing you to control scenes with it. The relays can be controlled both with the touch switches, which are integrated into the glass surface and via Z-Wave commands.\u003c\/p\u003e\n\u003cp\u003eThe relays can switch 4 loads with up to 1,100 watts each. Beside local switching, the device can be used to control 4 groups of directly associated devices. An LED on every button indicates the switching status. The wall switch can be easily connected to an electrical load without installing a flush mounted module separately. The relays are located inside a module which is directly connected to the glass touch button.\u003c\/p\u003e\n\u003cp\u003eWith the MCO Home wall switch, you can replace any switch insert or toggle switch. The wall switch can be mounted on any flush box and is made for UK standard wall boxes.\u003c\/p\u003e\n\u003cp\u003eWith the stylish glass wall switches by MCO Home, you can easily integrate your already installed lights into your home automation network. Without installing any new cable, you can switch your lighting as usual via wall switch – but thanks to Z-Wave technology also via remote control, smartphone or sensor-controlled automation.\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eWall switch with four integrated relays that handles max load of 5A each\u003c\/li\u003e\n\u003cli\u003eSupported Load types: Incandescent, Fluorescent, Ballast, Motor, CFL\u003c\/li\u003e\n\u003cli\u003eFlush-mounted in 86 x 86mm square UK junction box\u003c\/li\u003e\n\u003cli\u003eStylish glass touch switch (four buttons) with integrated LED\u003c\/li\u003e\n\u003cli\u003eReady-to-fit, incl. glass frame to replace complete wall switch\u003c\/li\u003e\n\u003cli\u003eFor 3-wire systems, neutral needed\u003c\/li\u003e\n\u003cli\u003eWireless Technology: Z-Wave \u003c\/li\u003e\n\u003cli\u003eDimensions: 86x86x39 mm \u003c\/li\u003e\n\u003cli\u003ePower supply: AC220V, 50Hz\u003c\/li\u003e\n\u003cli\u003eIP Class: IP 20\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eManuals\u003c\/h5\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1598\/5171\/files\/MH-S310_Series_Manual.pdf?8087305109611727537\" target=\"_blank\" title=\"Z-Wave MCO Home Touch Panel Switches 310 Series User Manual\" rel=\"noopener noreferrer\"\u003eZ-Wave MCO Home Touch Panel Switches 310 Series User Manual\u003c\/a\u003e (Size: 382 KB)","published_at":"2018-04-02T00:55:55+08:00","created_at":"2018-04-02T01:04:17+08:00","vendor":"MCOHome","type":"Appliances","tags":["Appliances_Ceiling Fan","Appliances_Heater","Appliances_Lighting","Brand_MCOHome","Standard_Z-Wave"],"price":19000,"price_min":19000,"price_max":19000,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":8084250099809,"title":"Black \/ EU (868Mhz)","option1":"Black","option2":"EU (868Mhz)","option3":null,"sku":"MCO_MH-S314-EU-B","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"MCO Home Touch Panel Switch (Four buttons) - Black \/ EU (868Mhz)","public_title":"Black \/ EU (868Mhz)","options":["Black","EU (868Mhz)"],"price":19000,"weight":400,"compare_at_price":null,"inventory_quantity":-3,"inventory_management":null,"inventory_policy":"deny","barcode":""},{"id":8084250132577,"title":"Black \/ KR (920.90Mhz)","option1":"Black","option2":"KR (920.90Mhz)","option3":null,"sku":"MCO_MH-S314-KR-B","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"MCO Home Touch Panel Switch (Four buttons) - Black \/ KR (920.90Mhz)","public_title":"Black \/ KR (920.90Mhz)","options":["Black","KR (920.90Mhz)"],"price":19000,"weight":400,"compare_at_price":null,"inventory_quantity":-4,"inventory_management":null,"inventory_policy":"deny","barcode":""},{"id":8084250165345,"title":"White \/ EU (868Mhz)","option1":"White","option2":"EU (868Mhz)","option3":null,"sku":"MCO_MH-S314-EU-B","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"MCO Home Touch Panel Switch (Four buttons) - White \/ EU (868Mhz)","public_title":"White \/ EU (868Mhz)","options":["White","EU (868Mhz)"],"price":19000,"weight":400,"compare_at_price":null,"inventory_quantity":-13,"inventory_management":null,"inventory_policy":"deny","barcode":""},{"id":8084250198113,"title":"White \/ KR (920.90Mhz)","option1":"White","option2":"KR (920.90Mhz)","option3":null,"sku":"MCO_MH-S314-KR-B","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"MCO Home Touch Panel Switch (Four buttons) - White \/ KR (920.90Mhz)","public_title":"White \/ KR (920.90Mhz)","options":["White","KR (920.90Mhz)"],"price":19000,"weight":400,"compare_at_price":null,"inventory_quantity":-9,"inventory_management":null,"inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1598\/5171\/products\/S314_W_Box.jpg?v=1522602616","\/\/cdn.shopify.com\/s\/files\/1\/1598\/5171\/products\/MCO-Home-S314-White.png?v=1522602616","\/\/cdn.shopify.com\/s\/files\/1\/1598\/5171\/products\/MCO-Home-S314-Black.png?v=1522602616"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1598\/5171\/products\/S314_W_Box.jpg?v=1522602616","options":["Color","Z-Wave Frequency"],"media":[{"alt":null,"id":1369005097057,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1100,"width":1100,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1598\/5171\/products\/S314_W_Box.jpg?v=1569156671"},"aspect_ratio":1.0,"height":1100,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1598\/5171\/products\/S314_W_Box.jpg?v=1569156671","width":1100},{"alt":null,"id":1369005064289,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1100,"width":1100,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1598\/5171\/products\/MCO-Home-S314-White.png?v=1569156671"},"aspect_ratio":1.0,"height":1100,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1598\/5171\/products\/MCO-Home-S314-White.png?v=1569156671","width":1100},{"alt":null,"id":1369005031521,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1100,"width":1100,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1598\/5171\/products\/MCO-Home-S314-Black.png?v=1569156671"},"aspect_ratio":1.0,"height":1100,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1598\/5171\/products\/MCO-Home-S314-Black.png?v=1569156671","width":1100}],"content":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cmeta charset=\"utf-8\"\u003e\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eThe\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eMCO Home Touch Panel Switch Gen5 \u003c\/strong\u003eis a wall switch with 4 integrated switch relays for UK standard wall boxes allowing you to control scenes with it. The relays can be controlled both with the touch switches, which are integrated into the glass surface and via Z-Wave commands.\u003c\/p\u003e\n\u003cp\u003eThe relays can switch 4 loads with up to 1,100 watts each. Beside local switching, the device can be used to control 4 groups of directly associated devices. An LED on every button indicates the switching status. The wall switch can be easily connected to an electrical load without installing a flush mounted module separately. The relays are located inside a module which is directly connected to the glass touch button.\u003c\/p\u003e\n\u003cp\u003eWith the MCO Home wall switch, you can replace any switch insert or toggle switch. The wall switch can be mounted on any flush box and is made for UK standard wall boxes.\u003c\/p\u003e\n\u003cp\u003eWith the stylish glass wall switches by MCO Home, you can easily integrate your already installed lights into your home automation network. Without installing any new cable, you can switch your lighting as usual via wall switch – but thanks to Z-Wave technology also via remote control, smartphone or sensor-controlled automation.\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eWall switch with four integrated relays that handles max load of 5A each\u003c\/li\u003e\n\u003cli\u003eSupported Load types: Incandescent, Fluorescent, Ballast, Motor, CFL\u003c\/li\u003e\n\u003cli\u003eFlush-mounted in 86 x 86mm square UK junction box\u003c\/li\u003e\n\u003cli\u003eStylish glass touch switch (four buttons) with integrated LED\u003c\/li\u003e\n\u003cli\u003eReady-to-fit, incl. glass frame to replace complete wall switch\u003c\/li\u003e\n\u003cli\u003eFor 3-wire systems, neutral needed\u003c\/li\u003e\n\u003cli\u003eWireless Technology: Z-Wave \u003c\/li\u003e\n\u003cli\u003eDimensions: 86x86x39 mm \u003c\/li\u003e\n\u003cli\u003ePower supply: AC220V, 50Hz\u003c\/li\u003e\n\u003cli\u003eIP Class: IP 20\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eManuals\u003c\/h5\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1598\/5171\/files\/MH-S310_Series_Manual.pdf?8087305109611727537\" target=\"_blank\" title=\"Z-Wave MCO Home Touch Panel Switches 310 Series User Manual\" rel=\"noopener noreferrer\"\u003eZ-Wave MCO Home Touch Panel Switches 310 Series User Manual\u003c\/a\u003e (Size: 382 KB)"}
Quick View
{"id":737727250529,"title":"MCO Home Touch Panel Switch (Two buttons)","handle":"mco-home-touch-panel-switch-two-buttons","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cmeta charset=\"utf-8\"\u003e\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eThe\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eMCO Home Touch Panel Switch Gen5\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eis a wall switch with 2 integrated switch relays for UK standard wall boxes allowing you to control scenes with it. The relays can be controlled both with the touch switches, which are integrated into the glass surface and via Z-Wave commands.\u003c\/p\u003e\n\u003cp\u003eThe relays can switch 2 loads with up to 1,100 watts each. Beside local switching, the device can be used to control 2 groups of directly associated devices. An LED on every button indicates the switching status. The wall switch can be easily connected to an electrical load without installing a flush mounted module separately. The relays are located inside a module which is directly connected to the glass touch button.\u003c\/p\u003e\n\u003cp\u003eWith the MCO Home wall switch, you can replace any switch insert or toggle switch. The wall switch can be mounted on any flush box and is made for UK wall boxes.\u003c\/p\u003e\n\u003cp\u003eWith the stylish glass wall switches by MCO Home, you can easily integrate your already installed lights into your home automation network. Without installing any new cable, you can switch your lighting as usual via wall switch – but thanks to Z-Wave technology also via remote control, smartphone or sensor-controlled automation.\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eWall switch with two integrated relays that handles max load of 5A each\u003c\/li\u003e\n\u003cli\u003eSupported Load types: Incandescent, Fluorescent, Ballast, Motor, CFL\u003c\/li\u003e\n\u003cli\u003eFlush-mounted in 86 x 86mm square UK junction box.\u003c\/li\u003e\n\u003cli\u003eStylish glass touch switch (two buttons) with integrated LED\u003c\/li\u003e\n\u003cli\u003eReady-to-fit, incl. glass frame to replace complete wall switch\u003c\/li\u003e\n\u003cli\u003eFor 3-wire systems, neutral needed\u003c\/li\u003e\n\u003cli\u003eWireless Technology: Z-Wave \u003c\/li\u003e\n\u003cli\u003eDimensions: 86x86x39 mm \u003c\/li\u003e\n\u003cli\u003ePower supply: AC220V, 50Hz\u003c\/li\u003e\n\u003cli\u003eIP Class: IP 20\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eManuals\u003c\/h5\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1598\/5171\/files\/MH-S310_Series_Manual.pdf?8087305109611727537\" target=\"_blank\" title=\"Z-Wave MCO Home Touch Panel Switches 310 Series User Manual\" rel=\"noopener noreferrer\"\u003eZ-Wave MCO Home Touch Panel Switches 310 Series User Manual\u003c\/a\u003e (Size: 382 KB)","published_at":"2018-04-02T00:55:55+08:00","created_at":"2018-04-02T00:56:42+08:00","vendor":"MCOHome","type":"Appliances","tags":["Appliances_Ceiling Fan","Appliances_Heater","Appliances_Lighting","Brand_MCOHome","Standard_Z-Wave"],"price":16000,"price_min":16000,"price_max":16000,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":8084221722721,"title":"Black \/ EU (868Mhz)","option1":"Black","option2":"EU (868Mhz)","option3":null,"sku":"MCO_MH-S312-EU-B","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"MCO Home Touch Panel Switch (Two buttons) - Black \/ EU (868Mhz)","public_title":"Black \/ EU (868Mhz)","options":["Black","EU (868Mhz)"],"price":16000,"weight":400,"compare_at_price":null,"inventory_quantity":-4,"inventory_management":null,"inventory_policy":"deny","barcode":""},{"id":8084221755489,"title":"Black \/ KR (920.90Mhz)","option1":"Black","option2":"KR (920.90Mhz)","option3":null,"sku":"MCO_MH-S312-KR-B","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"MCO Home Touch Panel Switch (Two buttons) - Black \/ KR (920.90Mhz)","public_title":"Black \/ KR (920.90Mhz)","options":["Black","KR (920.90Mhz)"],"price":16000,"weight":400,"compare_at_price":null,"inventory_quantity":-1,"inventory_management":null,"inventory_policy":"deny","barcode":""},{"id":8084221788257,"title":"White \/ EU (868Mhz)","option1":"White","option2":"EU (868Mhz)","option3":null,"sku":"MCO_MH-S312-EU-B","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"MCO Home Touch Panel Switch (Two buttons) - White \/ EU (868Mhz)","public_title":"White \/ EU (868Mhz)","options":["White","EU (868Mhz)"],"price":16000,"weight":400,"compare_at_price":null,"inventory_quantity":-5,"inventory_management":null,"inventory_policy":"deny","barcode":""},{"id":8084221821025,"title":"White \/ KR (920.90Mhz)","option1":"White","option2":"KR (920.90Mhz)","option3":null,"sku":"MCO_MH-S312-KR-B","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"MCO Home Touch Panel Switch (Two buttons) - White \/ KR (920.90Mhz)","public_title":"White \/ KR (920.90Mhz)","options":["White","KR (920.90Mhz)"],"price":16000,"weight":400,"compare_at_price":null,"inventory_quantity":-1,"inventory_management":null,"inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1598\/5171\/products\/S312_W_Box.jpg?v=1522602164","\/\/cdn.shopify.com\/s\/files\/1\/1598\/5171\/products\/MCO-Home-S312-White.png?v=1522602164","\/\/cdn.shopify.com\/s\/files\/1\/1598\/5171\/products\/MCO-Home-S312-Black.png?v=1522602164"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1598\/5171\/products\/S312_W_Box.jpg?v=1522602164","options":["Color","Z-Wave Frequency"],"media":[{"alt":null,"id":1369001164897,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1100,"width":1100,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1598\/5171\/products\/S312_W_Box.jpg?v=1569156670"},"aspect_ratio":1.0,"height":1100,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1598\/5171\/products\/S312_W_Box.jpg?v=1569156670","width":1100},{"alt":null,"id":1369001132129,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1100,"width":1100,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1598\/5171\/products\/MCO-Home-S312-White.png?v=1569156670"},"aspect_ratio":1.0,"height":1100,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1598\/5171\/products\/MCO-Home-S312-White.png?v=1569156670","width":1100},{"alt":null,"id":1369001099361,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1100,"width":1100,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1598\/5171\/products\/MCO-Home-S312-Black.png?v=1569156670"},"aspect_ratio":1.0,"height":1100,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1598\/5171\/products\/MCO-Home-S312-Black.png?v=1569156670","width":1100}],"content":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cmeta charset=\"utf-8\"\u003e\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eThe\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eMCO Home Touch Panel Switch Gen5\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eis a wall switch with 2 integrated switch relays for UK standard wall boxes allowing you to control scenes with it. The relays can be controlled both with the touch switches, which are integrated into the glass surface and via Z-Wave commands.\u003c\/p\u003e\n\u003cp\u003eThe relays can switch 2 loads with up to 1,100 watts each. Beside local switching, the device can be used to control 2 groups of directly associated devices. An LED on every button indicates the switching status. The wall switch can be easily connected to an electrical load without installing a flush mounted module separately. The relays are located inside a module which is directly connected to the glass touch button.\u003c\/p\u003e\n\u003cp\u003eWith the MCO Home wall switch, you can replace any switch insert or toggle switch. The wall switch can be mounted on any flush box and is made for UK wall boxes.\u003c\/p\u003e\n\u003cp\u003eWith the stylish glass wall switches by MCO Home, you can easily integrate your already installed lights into your home automation network. Without installing any new cable, you can switch your lighting as usual via wall switch – but thanks to Z-Wave technology also via remote control, smartphone or sensor-controlled automation.\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eWall switch with two integrated relays that handles max load of 5A each\u003c\/li\u003e\n\u003cli\u003eSupported Load types: Incandescent, Fluorescent, Ballast, Motor, CFL\u003c\/li\u003e\n\u003cli\u003eFlush-mounted in 86 x 86mm square UK junction box.\u003c\/li\u003e\n\u003cli\u003eStylish glass touch switch (two buttons) with integrated LED\u003c\/li\u003e\n\u003cli\u003eReady-to-fit, incl. glass frame to replace complete wall switch\u003c\/li\u003e\n\u003cli\u003eFor 3-wire systems, neutral needed\u003c\/li\u003e\n\u003cli\u003eWireless Technology: Z-Wave \u003c\/li\u003e\n\u003cli\u003eDimensions: 86x86x39 mm \u003c\/li\u003e\n\u003cli\u003ePower supply: AC220V, 50Hz\u003c\/li\u003e\n\u003cli\u003eIP Class: IP 20\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eManuals\u003c\/h5\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1598\/5171\/files\/MH-S310_Series_Manual.pdf?8087305109611727537\" target=\"_blank\" title=\"Z-Wave MCO Home Touch Panel Switches 310 Series User Manual\" rel=\"noopener noreferrer\"\u003eZ-Wave MCO Home Touch Panel Switches 310 Series User Manual\u003c\/a\u003e (Size: 382 KB)"}
Quick View
{"id":737823588449,"title":"MCO Home Touch Panel Switch 10A (Two buttons)","handle":"mco-home-touch-panel-switch-10a-two-buttons","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eMCO Home Touch Panel (10A) is a wall switch with two integrated switch relays for EU standard wall boxes. The relay can be controlled both with the touch switches, which are integrated into the glass surface, and via Z-Wave commands. The two relays can switch two loads of up to 2,300 watts each. Besides local switching the device can be used to control two groups of directly associated devices. An LED on every button indicates the switching status.\u003c\/p\u003e\n\u003cp\u003eThe wall switch can be easily connected to an electrical load without installing a flush mounted module separately. The relays are located inside a module which is directly connected to the glass touch button. With that MCO Home wall switch you can replace any switch insert or toggle switch.\u003c\/p\u003e\n\u003cp\u003eWith the stylish glass wall switches by MCO Home, you can easily integrate your already installed lights into your home automation network. Without installing any new cable, you can switch your lighting as usual via wall switch – but thanks to Z-Wave technology also via remote control, smartphone or sensor-controlled automation. \u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e2 x 10A support high inrush current LED bulbs\u003c\/li\u003e\n\u003cli\u003eWall switch with 2G integrated relay\u003c\/li\u003e\n\u003cli\u003eSuitable for EU wall boxes\u003c\/li\u003e\n\u003cli\u003eStylish glass touch switch (one button)\u003c\/li\u003e\n\u003cli\u003eReady-to-fit, incl. glass frame\u003c\/li\u003e\n\u003cli\u003eReplaces complete wall switch\u003c\/li\u003e\n\u003cli\u003e2 Relays with up to 2,300 W \/ 230 V AC each\u003c\/li\u003e\n\u003cli\u003eIntegrated status LED \u003c\/li\u003e\n\u003cli\u003eEnables Associations\u003c\/li\u003e\n\u003cli\u003eFor 3-wire systems, neutral needed\u003c\/li\u003e\n\u003cli\u003eWireless Technology: Z-Wave \u003c\/li\u003e\n\u003cli\u003eDimensions: 86x86x39 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eManuals\u003c\/h5\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1598\/5171\/files\/MH-S310_Series_Manual.pdf?8087305109611727537\" target=\"_blank\" title=\"Z-Wave MCO Home Touch Panel Switches 310 Series User Manual\" rel=\"noopener noreferrer\"\u003eZ-Wave MCO Home Touch Panel Switches 310 Series User Manual\u003c\/a\u003e (Size: 382 KB)","published_at":"2018-04-02T10:54:43+08:00","created_at":"2018-04-02T10:56:05+08:00","vendor":"MCOHome","type":"Appliances","tags":["Appliances_Ceiling Fan","Appliances_Heater","Appliances_Lighting","Brand_MCOHome","Standard_Z-Wave"],"price":17000,"price_min":17000,"price_max":17000,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":8097712603233,"title":"White \/ EU (868Mhz)","option1":"White","option2":"EU (868Mhz)","option3":null,"sku":"MCO_MH-S312H-EU-W","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"MCO Home Touch Panel Switch 10A (Two buttons) - White \/ EU (868Mhz)","public_title":"White \/ EU (868Mhz)","options":["White","EU (868Mhz)"],"price":17000,"weight":400,"compare_at_price":null,"inventory_quantity":-9,"inventory_management":null,"inventory_policy":"deny","barcode":""},{"id":8097712636001,"title":"Black \/ EU (868Mhz)","option1":"Black","option2":"EU (868Mhz)","option3":null,"sku":"MCO_MH-S312H-EU-B","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"MCO Home Touch Panel Switch 10A (Two buttons) - Black \/ EU (868Mhz)","public_title":"Black \/ EU (868Mhz)","options":["Black","EU (868Mhz)"],"price":17000,"weight":400,"compare_at_price":null,"inventory_quantity":-1,"inventory_management":null,"inventory_policy":"deny","barcode":""},{"id":8097712668769,"title":"White \/ KR (920.90Mhz)","option1":"White","option2":"KR (920.90Mhz)","option3":null,"sku":"MCO_MH-S312H-KR-W","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"MCO Home Touch Panel Switch 10A (Two buttons) - White \/ KR (920.90Mhz)","public_title":"White \/ KR (920.90Mhz)","options":["White","KR (920.90Mhz)"],"price":17000,"weight":400,"compare_at_price":null,"inventory_quantity":-1,"inventory_management":null,"inventory_policy":"deny","barcode":""},{"id":8097712701537,"title":"Black \/ KR (920.90Mhz)","option1":"Black","option2":"KR (920.90Mhz)","option3":null,"sku":"MCO_MH-S312H-KR-B","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"MCO Home Touch Panel Switch 10A (Two buttons) - Black \/ KR (920.90Mhz)","public_title":"Black \/ KR (920.90Mhz)","options":["Black","KR (920.90Mhz)"],"price":17000,"weight":400,"compare_at_price":null,"inventory_quantity":1,"inventory_management":null,"inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1598\/5171\/products\/S312_W_Box_a35040e5-802d-4800-9b64-1641fd889da1.jpg?v=1522637963","\/\/cdn.shopify.com\/s\/files\/1\/1598\/5171\/products\/MCO-Home-S312-White_8ffb71fb-b803-4a4c-9fc0-7dbf57e7ae80.png?v=1522637963","\/\/cdn.shopify.com\/s\/files\/1\/1598\/5171\/products\/MCO-Home-S312-Black_776e1aa1-f15e-42b2-b61a-5d0fa2fa9769.png?v=1522637963"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1598\/5171\/products\/S312_W_Box_a35040e5-802d-4800-9b64-1641fd889da1.jpg?v=1522637963","options":["Color","Z-Wave Frequency"],"media":[{"alt":null,"id":1369183322209,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1100,"width":1100,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1598\/5171\/products\/S312_W_Box_a35040e5-802d-4800-9b64-1641fd889da1.jpg?v=1569156714"},"aspect_ratio":1.0,"height":1100,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1598\/5171\/products\/S312_W_Box_a35040e5-802d-4800-9b64-1641fd889da1.jpg?v=1569156714","width":1100},{"alt":null,"id":1369183289441,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1100,"width":1100,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1598\/5171\/products\/MCO-Home-S312-White_8ffb71fb-b803-4a4c-9fc0-7dbf57e7ae80.png?v=1569156714"},"aspect_ratio":1.0,"height":1100,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1598\/5171\/products\/MCO-Home-S312-White_8ffb71fb-b803-4a4c-9fc0-7dbf57e7ae80.png?v=1569156714","width":1100},{"alt":null,"id":1369183256673,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1100,"width":1100,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1598\/5171\/products\/MCO-Home-S312-Black_776e1aa1-f15e-42b2-b61a-5d0fa2fa9769.png?v=1569156714"},"aspect_ratio":1.0,"height":1100,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1598\/5171\/products\/MCO-Home-S312-Black_776e1aa1-f15e-42b2-b61a-5d0fa2fa9769.png?v=1569156714","width":1100}],"content":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eMCO Home Touch Panel (10A) is a wall switch with two integrated switch relays for EU standard wall boxes. The relay can be controlled both with the touch switches, which are integrated into the glass surface, and via Z-Wave commands. The two relays can switch two loads of up to 2,300 watts each. Besides local switching the device can be used to control two groups of directly associated devices. An LED on every button indicates the switching status.\u003c\/p\u003e\n\u003cp\u003eThe wall switch can be easily connected to an electrical load without installing a flush mounted module separately. The relays are located inside a module which is directly connected to the glass touch button. With that MCO Home wall switch you can replace any switch insert or toggle switch.\u003c\/p\u003e\n\u003cp\u003eWith the stylish glass wall switches by MCO Home, you can easily integrate your already installed lights into your home automation network. Without installing any new cable, you can switch your lighting as usual via wall switch – but thanks to Z-Wave technology also via remote control, smartphone or sensor-controlled automation. \u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e2 x 10A support high inrush current LED bulbs\u003c\/li\u003e\n\u003cli\u003eWall switch with 2G integrated relay\u003c\/li\u003e\n\u003cli\u003eSuitable for EU wall boxes\u003c\/li\u003e\n\u003cli\u003eStylish glass touch switch (one button)\u003c\/li\u003e\n\u003cli\u003eReady-to-fit, incl. glass frame\u003c\/li\u003e\n\u003cli\u003eReplaces complete wall switch\u003c\/li\u003e\n\u003cli\u003e2 Relays with up to 2,300 W \/ 230 V AC each\u003c\/li\u003e\n\u003cli\u003eIntegrated status LED \u003c\/li\u003e\n\u003cli\u003eEnables Associations\u003c\/li\u003e\n\u003cli\u003eFor 3-wire systems, neutral needed\u003c\/li\u003e\n\u003cli\u003eWireless Technology: Z-Wave \u003c\/li\u003e\n\u003cli\u003eDimensions: 86x86x39 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eManuals\u003c\/h5\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1598\/5171\/files\/MH-S310_Series_Manual.pdf?8087305109611727537\" target=\"_blank\" title=\"Z-Wave MCO Home Touch Panel Switches 310 Series User Manual\" rel=\"noopener noreferrer\"\u003eZ-Wave MCO Home Touch Panel Switches 310 Series User Manual\u003c\/a\u003e (Size: 382 KB)"}
$120.00
Quick View
{"id":10431255571,"title":"Aeotec Nano Dimmer","handle":"aeotec-nano-dimmer","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003ch4\u003eSmallest Z-Wave in-wall Dimmer.\u003c\/h4\u003e\n\u003cmeta charset=\"utf-8\"\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1598\/5171\/files\/z-wave-nano-dimmer_large.png?v=1494066595\" alt=\"Nano dimmer\" align=\"left\"\u003e\n\u003cp align=\"justify\"\u003eNano Dimmer retrofits to any switch to make it a smart one. It is universally compatible with leading and trailing edge systems as well as all modern bulbs including dimmable LEDs. Nano Dimmer continues to offer everything that Aeotec pioneered in retrofit lighting control: reliable power metering function and an installation time of less than 5 minutes.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003e60% smaller in size. 100% reengineered. To create an upgrade this advanced, you have to start at the very beginning. And that’s what we’ve done with Nano Dimmer, our next-gen lighting controller. Our 3rd generation of invisible lighting controller outperforms all that has come before it. Dimming is smoother. Compatibility is broader. Lighting is faster and more responsive. Automation and intelligence have never been more powerful. And it comes in such a small size, that you’ll be amazed at just how much functionality we were able to craft inside.\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003ch4\u003eEasy to install.\u003c\/h4\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp align=\"justify\"\u003eNano Dimmer lets you add new and existing lights to your ZWave system. It makes your lights smarter. It makes them responsive. It gives you the ability to control them, schedule, dim them and brighten them. All that control and intelligence comes from simply wiring Nano Dimmer behind an existing wall switch.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1598\/5171\/products\/nano-dimmer-wiring_2x_0c51cd6f-e21b-4b20-b779-a2d6a3152e5c_large.png?v=1494066559\" alt=\"\" width=\"276\" height=\"161\" style=\"display: block; margin-left: auto; margin-right: auto;\"\u003e\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003ch4\u003eThe best lighting compatibility yet.\u003c\/h4\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp align=\"justify\"\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1598\/5171\/files\/lightbulb-compatibility_2x_9c1bd176-a038-46ac-857d-407238d4d2e6_large.png?v=1494067874\" width=\"150\" alt=\"Compatibility\" align=\"left\"\u003eLight bulb compatibility used to be complex. Now it’s never been easier. Powered by both its dedicated Lighting Engine and a dedicated 32-bit CPU, Nano Dimmer calculates lighting at unparalleled speeds. It calculates perfectly smooth dimming, and it calculates perfect bulb compatibility, self-adjusting its settings whenever a new bulb is attached.\u003cbr\u003e\u003cbr\u003eThat means that you won’t ever have a problem finding lights that works with Nano Dimmer’s list of compatible bulbs. And that’s a list that’ll keep on growing. Lighting Engine can be upgraded, meaning that new compatibility calculations are only ever a firmware upgrade away.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003e \u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003ch4\u003eWorks with existing switch.\u003c\/h4\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp align=\"justify\"\u003eNano Dimmer has been designed to enhance your home, not to completely change it. That is why it is been designed to work with most of the light switches typically found in homes, new or old. It installs invisibly behind them, enhancing their functionality instead of completely replacing it. Nano Dimmer can be connected to the following light switches;\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003ch5 class=\"p1\"\u003eSpecifications\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003ePerfectly small: 43x39.5x15.98(mm)\u003c\/li\u003e\n\u003cli\u003eUniversal light bulb compatibility: Incandescent, Halogen (with transformer\/without transformer), Dimmable LED bulbs, Dimmable CFL lights, Fluorescent bulbs\u003c\/li\u003e\n\u003cli\u003eOther load: Fans\u003c\/li\u003e\n\u003cli\u003eUniversal wall switch: Toggle switch, three-wire switch, 3-position (On\/Off\/Dim) momentary switch\u003c\/li\u003e\n\u003cli\u003eCompatible with 2 and 3 wire electrical systems\u003c\/li\u003e\n\u003cli\u003eSupports both leading and trailing edge\u003c\/li\u003e\n\u003cli\u003eAuto-adjustment of the appropriate control mode to connected load\u003c\/li\u003e\n\u003cli\u003eSurge Protection\u003c\/li\u003e\n\u003cli\u003eActive power and energy metering functionality\u003c\/li\u003e\n\u003cli\u003eAuto off \/ Auto on timer\u003c\/li\u003e\n\u003cli\u003eLighting scene control\u003c\/li\u003e\n\u003cli\u003eNetwork strength indicator\u003c\/li\u003e\n\u003cli\u003eRepeater\u003c\/li\u003e\n\u003cli\u003eRamp rate: Settable\u003c\/li\u003e\n\u003cli\u003eZ-Wave plus technology using 500 series Z-Wave chip\u003c\/li\u003e\n\u003cli\u003eOperation Temperature: 32 °F ~104 °F \/0 °C ~40 °C\u003c\/li\u003e\n\u003cli\u003eStore Temperature: -4 °F ~140 °F \/-20 °C ~60 °C\u003c\/li\u003e\n\u003cli\u003eWorking Humidity: 8% ~ 80%\u003c\/li\u003e\n\u003cli\u003eWire gauges: Max 12AWG\u003c\/li\u003e\n\u003cli\u003eInput: 120VAC or 240VAC, Max 1.2A\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5 class=\"p1\"\u003eVideos\u003c\/h5\u003e\n\u003cp align=\"center\"\u003e\u003ciframe width=\"854\" height=\"480\" src=\"https:\/\/www.youtube.com\/embed\/2MCPrLXr6zk\" frameborder=\"0\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003ch5\u003eManuals\u003c\/h5\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1598\/5171\/files\/Aeotec_Nano_Dimmer_User_Manual.pdf?7479996950451736959\" target=\"_blank\" title=\"Aeotec Nano Dimmer User Manual\" rel=\"noopener noreferrer\"\u003eAeotec Nano Dimmer User Manual\u003c\/a\u003e (Size: 1.12 MB)\u003cbr\u003e\u003cbr\u003e \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1598\/5171\/files\/Aeotec_Nano_Dimmer_Engineering_Sheet.pdf?15545871781192113894\" target=\"_blank\" title=\"Aeotec Nano Dimmer Engineering Sheet\" rel=\"noopener noreferrer\"\u003eAeotec Nano Dimmer Engineering Sheet\u003c\/a\u003e (Size: 327 KB)","published_at":"2018-04-04T12:03:36+08:00","created_at":"2017-05-06T18:29:12+08:00","vendor":"Aeotec","type":"Appliances","tags":["Appliances_Dimmer","Brand_Aeotec","Standard_Z-Wave"],"price":12000,"price_min":12000,"price_max":12000,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":42292160467,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"AEO_ZW111","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"Aeotec Nano Dimmer","public_title":null,"options":["Default Title"],"price":12000,"weight":100,"compare_at_price":null,"inventory_quantity":-7,"inventory_management":null,"inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1598\/5171\/products\/Aeotec_nano_dimmer_box.png?v=1522814484","\/\/cdn.shopify.com\/s\/files\/1\/1598\/5171\/products\/Aeotec_nano_dimmer_front.png?v=1522814484","\/\/cdn.shopify.com\/s\/files\/1\/1598\/5171\/products\/Aeotec_nano_dimmer_angle.png?v=1522814484","\/\/cdn.shopify.com\/s\/files\/1\/1598\/5171\/products\/Aeotec_nano_dimmer_bottom.png?v=1522814484","\/\/cdn.shopify.com\/s\/files\/1\/1598\/5171\/products\/Aeotec_nano_dimmer_flat.png?v=1522814484"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1598\/5171\/products\/Aeotec_nano_dimmer_box.png?v=1522814484","options":["Title"],"media":[{"alt":null,"id":1370125205601,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1065,"width":1065,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1598\/5171\/products\/Aeotec_nano_dimmer_box.png?v=1569156888"},"aspect_ratio":1.0,"height":1065,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1598\/5171\/products\/Aeotec_nano_dimmer_box.png?v=1569156888","width":1065},{"alt":null,"id":1370125271137,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1065,"width":1065,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1598\/5171\/products\/Aeotec_nano_dimmer_front.png?v=1569156888"},"aspect_ratio":1.0,"height":1065,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1598\/5171\/products\/Aeotec_nano_dimmer_front.png?v=1569156888","width":1065},{"alt":null,"id":1370125140065,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1065,"width":1065,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1598\/5171\/products\/Aeotec_nano_dimmer_angle.png?v=1569156888"},"aspect_ratio":1.0,"height":1065,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1598\/5171\/products\/Aeotec_nano_dimmer_angle.png?v=1569156888","width":1065},{"alt":null,"id":1370125172833,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1065,"width":1065,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1598\/5171\/products\/Aeotec_nano_dimmer_bottom.png?v=1569156888"},"aspect_ratio":1.0,"height":1065,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1598\/5171\/products\/Aeotec_nano_dimmer_bottom.png?v=1569156888","width":1065},{"alt":null,"id":1370125238369,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1065,"width":1065,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1598\/5171\/products\/Aeotec_nano_dimmer_flat.png?v=1569156888"},"aspect_ratio":1.0,"height":1065,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1598\/5171\/products\/Aeotec_nano_dimmer_flat.png?v=1569156888","width":1065}],"content":"\u003cmeta charset=\"utf-8\"\u003e\n\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003ch4\u003eSmallest Z-Wave in-wall Dimmer.\u003c\/h4\u003e\n\u003cmeta charset=\"utf-8\"\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1598\/5171\/files\/z-wave-nano-dimmer_large.png?v=1494066595\" alt=\"Nano dimmer\" align=\"left\"\u003e\n\u003cp align=\"justify\"\u003eNano Dimmer retrofits to any switch to make it a smart one. It is universally compatible with leading and trailing edge systems as well as all modern bulbs including dimmable LEDs. Nano Dimmer continues to offer everything that Aeotec pioneered in retrofit lighting control: reliable power metering function and an installation time of less than 5 minutes.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003e60% smaller in size. 100% reengineered. To create an upgrade this advanced, you have to start at the very beginning. And that’s what we’ve done with Nano Dimmer, our next-gen lighting controller. Our 3rd generation of invisible lighting controller outperforms all that has come before it. Dimming is smoother. Compatibility is broader. Lighting is faster and more responsive. Automation and intelligence have never been more powerful. And it comes in such a small size, that you’ll be amazed at just how much functionality we were able to craft inside.\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003ch4\u003eEasy to install.\u003c\/h4\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp align=\"justify\"\u003eNano Dimmer lets you add new and existing lights to your ZWave system. It makes your lights smarter. It makes them responsive. It gives you the ability to control them, schedule, dim them and brighten them. All that control and intelligence comes from simply wiring Nano Dimmer behind an existing wall switch.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1598\/5171\/products\/nano-dimmer-wiring_2x_0c51cd6f-e21b-4b20-b779-a2d6a3152e5c_large.png?v=1494066559\" alt=\"\" width=\"276\" height=\"161\" style=\"display: block; margin-left: auto; margin-right: auto;\"\u003e\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003ch4\u003eThe best lighting compatibility yet.\u003c\/h4\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp align=\"justify\"\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1598\/5171\/files\/lightbulb-compatibility_2x_9c1bd176-a038-46ac-857d-407238d4d2e6_large.png?v=1494067874\" width=\"150\" alt=\"Compatibility\" align=\"left\"\u003eLight bulb compatibility used to be complex. Now it’s never been easier. Powered by both its dedicated Lighting Engine and a dedicated 32-bit CPU, Nano Dimmer calculates lighting at unparalleled speeds. It calculates perfectly smooth dimming, and it calculates perfect bulb compatibility, self-adjusting its settings whenever a new bulb is attached.\u003cbr\u003e\u003cbr\u003eThat means that you won’t ever have a problem finding lights that works with Nano Dimmer’s list of compatible bulbs. And that’s a list that’ll keep on growing. Lighting Engine can be upgraded, meaning that new compatibility calculations are only ever a firmware upgrade away.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003e \u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003ch4\u003eWorks with existing switch.\u003c\/h4\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp align=\"justify\"\u003eNano Dimmer has been designed to enhance your home, not to completely change it. That is why it is been designed to work with most of the light switches typically found in homes, new or old. It installs invisibly behind them, enhancing their functionality instead of completely replacing it. Nano Dimmer can be connected to the following light switches;\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003ch5 class=\"p1\"\u003eSpecifications\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003ePerfectly small: 43x39.5x15.98(mm)\u003c\/li\u003e\n\u003cli\u003eUniversal light bulb compatibility: Incandescent, Halogen (with transformer\/without transformer), Dimmable LED bulbs, Dimmable CFL lights, Fluorescent bulbs\u003c\/li\u003e\n\u003cli\u003eOther load: Fans\u003c\/li\u003e\n\u003cli\u003eUniversal wall switch: Toggle switch, three-wire switch, 3-position (On\/Off\/Dim) momentary switch\u003c\/li\u003e\n\u003cli\u003eCompatible with 2 and 3 wire electrical systems\u003c\/li\u003e\n\u003cli\u003eSupports both leading and trailing edge\u003c\/li\u003e\n\u003cli\u003eAuto-adjustment of the appropriate control mode to connected load\u003c\/li\u003e\n\u003cli\u003eSurge Protection\u003c\/li\u003e\n\u003cli\u003eActive power and energy metering functionality\u003c\/li\u003e\n\u003cli\u003eAuto off \/ Auto on timer\u003c\/li\u003e\n\u003cli\u003eLighting scene control\u003c\/li\u003e\n\u003cli\u003eNetwork strength indicator\u003c\/li\u003e\n\u003cli\u003eRepeater\u003c\/li\u003e\n\u003cli\u003eRamp rate: Settable\u003c\/li\u003e\n\u003cli\u003eZ-Wave plus technology using 500 series Z-Wave chip\u003c\/li\u003e\n\u003cli\u003eOperation Temperature: 32 °F ~104 °F \/0 °C ~40 °C\u003c\/li\u003e\n\u003cli\u003eStore Temperature: -4 °F ~140 °F \/-20 °C ~60 °C\u003c\/li\u003e\n\u003cli\u003eWorking Humidity: 8% ~ 80%\u003c\/li\u003e\n\u003cli\u003eWire gauges: Max 12AWG\u003c\/li\u003e\n\u003cli\u003eInput: 120VAC or 240VAC, Max 1.2A\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5 class=\"p1\"\u003eVideos\u003c\/h5\u003e\n\u003cp align=\"center\"\u003e\u003ciframe width=\"854\" height=\"480\" src=\"https:\/\/www.youtube.com\/embed\/2MCPrLXr6zk\" frameborder=\"0\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003ch5\u003eManuals\u003c\/h5\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1598\/5171\/files\/Aeotec_Nano_Dimmer_User_Manual.pdf?7479996950451736959\" target=\"_blank\" title=\"Aeotec Nano Dimmer User Manual\" rel=\"noopener noreferrer\"\u003eAeotec Nano Dimmer User Manual\u003c\/a\u003e (Size: 1.12 MB)\u003cbr\u003e\u003cbr\u003e \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1598\/5171\/files\/Aeotec_Nano_Dimmer_Engineering_Sheet.pdf?15545871781192113894\" target=\"_blank\" title=\"Aeotec Nano Dimmer Engineering Sheet\" rel=\"noopener noreferrer\"\u003eAeotec Nano Dimmer Engineering Sheet\u003c\/a\u003e (Size: 327 KB)"}
$120.00
Quick View
{"id":9435864903,"title":"FIBARO Double Switch 2","handle":"fibaro-double-switch-2","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eThe new Relay Switch 2 available as a Single and Double switch was designed to activate and deactivate electrical devices. Thanks to its small size it can be mounted in junction boxes or inside device casings. The module is controlled either through the Z-Wave network or a simple switch. Power and energy usage measurement feature allows you to monitor and lower your utility bills. Connect your FIBARO Switch 2 to the system and other devices to enjoy the almost endless possibilities!\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eBuilt-in scene activation mechanism\u003c\/li\u003e\n\u003cli\u003eSecurity and notification communication classes\u003c\/li\u003e\n\u003cli\u003eConfiguration menu with a diode\u003c\/li\u003e\n\u003cli\u003eLatest generation Z-Wave 500 series chip\u003c\/li\u003e\n\u003cli\u003eZ-Wave Plus protocol\u003c\/li\u003e\n\u003cli\u003eEnergy and power measurement of connected devices\u003c\/li\u003e\n\u003cli\u003eSupports secure mode (Z-Wave Network Security) encrypted with AES-128\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eA complex system of control for each channel\u003c\/li\u003e\n\u003cli\u003eA complex system of scene activation for each channel (scene management)\u003c\/li\u003e\n\u003cli\u003e1 to 3 presses and holding the key pressed down can be mapped to four different actions\u003c\/li\u003e\n\u003cli\u003eVery accurate energy measurement +\/- 1 % for power above 5W\u003c\/li\u003e\n\u003cli\u003eSmart notifications\u003c\/li\u003e\n\u003cli\u003eSockets with more convenient connectors\u003c\/li\u003e\n\u003cli\u003eUser-friendly configuration menu\u003c\/li\u003e\n\u003cli\u003eZ-Wave network coverage tester\u003c\/li\u003e\n\u003cli\u003eSoftware updates*\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cul\u003e\n\u003cli\u003eRadio protocol: Z-Wave+\u003c\/li\u003e\n\u003cli\u003eWireless: Z-Wave (868.42MHz)\u003c\/li\u003e\n\u003cli\u003eRadio signal power: up to 1mW\u003c\/li\u003e\n\u003cli\u003eVoltage: 110 - 240V AC\u003c\/li\u003e\n\u003cli\u003eMaximum load (per channel): 6.5A (Resistive)\u003c\/li\u003e\n\u003cli\u003eMaximum total load: 10A (Resistive)\u003c\/li\u003e\n\u003cli\u003ePower Consumption: \u0026lt; 0.8W\u003c\/li\u003e\n\u003cli\u003eOvercurrent protection: required external 10A circuit breaker\u003c\/li\u003e\n\u003cli\u003eRange: up to 50m (outdoors) and 40m (indoors)\u003c\/li\u003e\n\u003cli\u003eDimensions (LxWxH): 43 x 38 x 20 mm\u003c\/li\u003e\n\u003cli\u003eOperational temperature: 0-35°C\u003c\/li\u003e\n\u003cli\u003eScene management: 1 to 3 presses and holding the key pressed down can be mapped to four different actions\u003c\/li\u003e\n\u003cli\u003eSystem of control for each channel: Standard control, Delayed device activation, Delayed device deactivation, Auto on and auto off mode with additional options\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003e Videos\u003c\/h5\u003e\n\u003cp\u003e\u003ciframe width=\"640\" height=\"360\" src=\"https:\/\/www.youtube.com\/embed\/hSVadYFTp2M\" frameborder=\"0\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2018-04-06T00:20:01+08:00","created_at":"2016-11-22T09:02:44+08:00","vendor":"FIBARO","type":"Appliances","tags":["Appliances_Ceiling Fan","Appliances_Lighting","Brand_FIBARO","Standard_Z-Wave"],"price":12000,"price_min":12000,"price_max":12000,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":34524559879,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"FIB_FGS-223","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"FIBARO Double Switch 2","public_title":null,"options":["Default Title"],"price":12000,"weight":130,"compare_at_price":null,"inventory_quantity":4,"inventory_management":null,"inventory_policy":"continue","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1598\/5171\/products\/fibefgs-223_1.jpg?v=1479776568"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1598\/5171\/products\/fibefgs-223_1.jpg?v=1479776568","options":["Title"],"media":[{"alt":"Fibaro Double Switch 2 Gen 5","id":331124244577,"position":1,"preview_image":{"aspect_ratio":1.0,"height":800,"width":800,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1598\/5171\/products\/fibefgs-223_1.jpg?v=1568955069"},"aspect_ratio":1.0,"height":800,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1598\/5171\/products\/fibefgs-223_1.jpg?v=1568955069","width":800}],"content":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eThe new Relay Switch 2 available as a Single and Double switch was designed to activate and deactivate electrical devices. Thanks to its small size it can be mounted in junction boxes or inside device casings. The module is controlled either through the Z-Wave network or a simple switch. Power and energy usage measurement feature allows you to monitor and lower your utility bills. Connect your FIBARO Switch 2 to the system and other devices to enjoy the almost endless possibilities!\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eBuilt-in scene activation mechanism\u003c\/li\u003e\n\u003cli\u003eSecurity and notification communication classes\u003c\/li\u003e\n\u003cli\u003eConfiguration menu with a diode\u003c\/li\u003e\n\u003cli\u003eLatest generation Z-Wave 500 series chip\u003c\/li\u003e\n\u003cli\u003eZ-Wave Plus protocol\u003c\/li\u003e\n\u003cli\u003eEnergy and power measurement of connected devices\u003c\/li\u003e\n\u003cli\u003eSupports secure mode (Z-Wave Network Security) encrypted with AES-128\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eA complex system of control for each channel\u003c\/li\u003e\n\u003cli\u003eA complex system of scene activation for each channel (scene management)\u003c\/li\u003e\n\u003cli\u003e1 to 3 presses and holding the key pressed down can be mapped to four different actions\u003c\/li\u003e\n\u003cli\u003eVery accurate energy measurement +\/- 1 % for power above 5W\u003c\/li\u003e\n\u003cli\u003eSmart notifications\u003c\/li\u003e\n\u003cli\u003eSockets with more convenient connectors\u003c\/li\u003e\n\u003cli\u003eUser-friendly configuration menu\u003c\/li\u003e\n\u003cli\u003eZ-Wave network coverage tester\u003c\/li\u003e\n\u003cli\u003eSoftware updates*\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cul\u003e\n\u003cli\u003eRadio protocol: Z-Wave+\u003c\/li\u003e\n\u003cli\u003eWireless: Z-Wave (868.42MHz)\u003c\/li\u003e\n\u003cli\u003eRadio signal power: up to 1mW\u003c\/li\u003e\n\u003cli\u003eVoltage: 110 - 240V AC\u003c\/li\u003e\n\u003cli\u003eMaximum load (per channel): 6.5A (Resistive)\u003c\/li\u003e\n\u003cli\u003eMaximum total load: 10A (Resistive)\u003c\/li\u003e\n\u003cli\u003ePower Consumption: \u0026lt; 0.8W\u003c\/li\u003e\n\u003cli\u003eOvercurrent protection: required external 10A circuit breaker\u003c\/li\u003e\n\u003cli\u003eRange: up to 50m (outdoors) and 40m (indoors)\u003c\/li\u003e\n\u003cli\u003eDimensions (LxWxH): 43 x 38 x 20 mm\u003c\/li\u003e\n\u003cli\u003eOperational temperature: 0-35°C\u003c\/li\u003e\n\u003cli\u003eScene management: 1 to 3 presses and holding the key pressed down can be mapped to four different actions\u003c\/li\u003e\n\u003cli\u003eSystem of control for each channel: Standard control, Delayed device activation, Delayed device deactivation, Auto on and auto off mode with additional options\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003e Videos\u003c\/h5\u003e\n\u003cp\u003e\u003ciframe width=\"640\" height=\"360\" src=\"https:\/\/www.youtube.com\/embed\/hSVadYFTp2M\" frameborder=\"0\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e"}
Quick View
{"id":12247443411,"title":"Aeotec Dual Nano Switch","handle":"aeotec-dual-nano-switch","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1598\/5171\/files\/Aeotec_dual_nano_switch_in_hand_medium.jpg?v=1522737596\" alt=\"Aeotec Dual Nano Switch in hand\" style=\"display: block; margin-left: auto; margin-right: auto;\"\u003e\u003c\/p\u003e\n\u003cp style=\"font-size: 2em; color: #4ec8ea; margin-bottom: 25px;\" align=\"center\"\u003eControl any switch and socket wirelessly from anywhere.\u003c\/p\u003e\n\u003cp\u003eAeotec Dual Nano Switch is a low-cost ZWave Switch specifically used to enable Z-Wave command and control (on\/off) of any wall switches. With the Aeotec Dual Nano Switch all switchable and non-dimmable electric installations (e.g. lighting, sockets...) can be integrated into a Z-Wave network. Thus, the connected load can be switched both wirelessly via Z-Wave and locally via existing wall switch. In the event of power failure, non-volatile memory retains all programmed information relating to the unit’s operating status.\u003cbr\u003e\u003cbr\u003eIt can connect to 2 external manual switches to control the load ON\/OFF independently. Its surface has a pin socket, which can be used for connecting to the touch panel, so you can also use the touch panel to control the Dual Nano Switch. The Dual Nano Switch is also a security Z-Wave device and supports Over The Air (OTA) feature for the products firmware upgrade.\u003c\/p\u003e\n\u003ch3\u003eTotal Control\u003c\/h3\u003e\n\u003cp\u003eNano Switch offers total control, easily. Incredibly small, each Nano Switch installs invisibly behind any of your home’s existing switches or power sockets. Simply unscrew the faceplate, install Nano Switch behind it, and you now have complete wireless control. Your old switches are instantly modern and instantly connected.\u003cbr\u003e\u003cbr\u003eInstall Nano Switch behind your wall’s power sockets and you now have wireless control and scheduling of your electronics. With optional power metering, you can reduce how much those electronics are costing you.\u003cbr\u003e\u003cbr\u003eIf you have lighting that doesn’t need dimming, install Nano Switch behind your existing wall switch to convert it to a wireless wall switch. You’ll have full wireless switch control, along with intelligent automation and scheduling via Z-Wave.\u003c\/p\u003e\n\u003ch3\u003eTotal Ability\u003c\/h3\u003e\n\u003cp\u003eOnce installed behind a switch or socket, Nano Switch offers unparalleled wireless control via Z-Wave Plus. It lets you control, automate and monitor your lights and power sockets from anywhere, anytime. And it does it all through enhancement – with Nano Switch, your sockets and switches don’t have to be replaced and they’ll continue to offer the same manual control that you’re used to.\u003c\/p\u003e\n\u003ch3\u003eTotal Home\u003c\/h3\u003e\n\u003cp\u003eNano Switch is a tool that installs in a few minutes. It lets you control, monitor, automate and schedule the electronics in your home. Control the electronics you use every day - your lights, appliances and entertainment systems. There’ll also be the electronics that become a part of your smart home as it grows - security and safety devices, electronics indoors and out. If there’s a reason to automate it, to monitor it or make it responsive, Nano Switch is the invisible, controlling, and responsive touch.\u003c\/p\u003e\n\u003ch3\u003eSafely Small and Controllable from Anywhere\u003c\/h3\u003e\n\u003cp\u003eDual Nano Switch works with your existing switches and sockets and can be easily controlled and scheduled trough the Z-Wave network by a Z-Wave gateway and app. It can also be controlled by other Z-Wave devices such as Aeotec's WallMote.\u003cbr\u003e\u003cbr\u003eBesides its small size that allows your Dual Nano Switch to be installed behind your home’s switches or sockets, Nano Switch also features with In-built surge protection and AES-128 bit wireless encryption.\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003ctable style=\"width: 100%; margin-left: auto; margin-right: auto;\" border=\"0\" cellspacing=\"20\" cellpadding=\"0\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 33.33%; margin-left: 15px;\"\u003e\n\u003ch3 style=\"padding-top: 0px; text-align: center;\"\u003ePowerful control\u003c\/h3\u003e\n\u003cp style=\"padding-top: 0px; padding-right: 30px; text-align: justify;\"\u003eDesigned to control sockets, switches and non-dimming lights powerfully Dual Nano Switch can control up to 10 amps.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 33.33%; margin-left: 5px; margin-right: 5px;\"\u003e\n\u003ch3 style=\"padding-top: 0px; text-align: center;\"\u003eSafer and easier wiring\u003c\/h3\u003e\n\u003cp style=\"padding-top: 0px; padding-left: 10px; padding-right: 10px; text-align: justify;\"\u003eDual Nano Switch only works with switches and outlets that utilise a neutral wire. Thanks to its smaller design, Dual Nano Switch also connects to wires 25% thicker than past models.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 33.33%; margin-left: 15px;\"\u003e\n\u003ch3 style=\"padding-top: 0px; text-align: center;\"\u003eWirelessly updated\u003c\/h3\u003e\n\u003cp style=\"padding-top: 0px; padding-left: 30px; text-align: justify;\"\u003eDual Nano Switch allows for firmware updates to be wirelessly installed via Z-Wave Plus and supports Over The Air (OTA) feature for the products firmware upgrade.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ctable style=\"width: 100%; margin-left: auto; margin-right: auto;\" border=\"0\" cellspacing=\"20\" cellpadding=\"0\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 33.33%; margin-left: 15px;\"\u003e\n\u003ch3 style=\"padding-top: 0px; text-align: center;\"\u003eFull scheduling\u003c\/h3\u003e\n\u003cp style=\"padding-top: 0px; padding-right: 30px; text-align: justify;\"\u003eDual Nano Switch can also be intelligently automated and scheduled to switch on and off on a timer independently, even when your Z-Wave gateway has connection issues.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 33.33%; margin-left: 5px; margin-right: 5px;\"\u003e\n\u003ch3 style=\"padding-top: 0px; text-align: center;\"\u003eSafely small\u003c\/h3\u003e\n\u003cp style=\"padding-top: 0px; padding-left: 10px; padding-right: 10px; text-align: justify;\"\u003eDesigned to fit behind a wall switch without compromising on safety, Dual Nano Switch offers twice the control at only 4.4cm x 4cm x 2.5cm.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 33.33%; margin-left: 15px;\"\u003e\n\u003ch3 style=\"padding-top: 0px; text-align: center;\"\u003eLow voltage also\u003c\/h3\u003e\n\u003cp style=\"padding-top: 0px; padding-left: 30px; text-align: justify;\"\u003eDual Nano Switch is great with high voltage and low voltage. It can be used to control 24VDC electronics such as light strips, alarms, doorbells, and other low-powered devices.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eModel number: ZW140 \/ ZW132 (Power metering)\u003c\/li\u003e\n\u003cli\u003ePower input: 120VAC to 240VAC, 50Hz to 60Hz.\u003c\/li\u003e\n\u003cli\u003eRated output: 6.5A per channel for resistive load.\u003c\/li\u003e\n\u003cli\u003eTotal current: Max 10A.\u003c\/li\u003e\n\u003cli\u003eMax standby power: 0.8W.\u003c\/li\u003e\n\u003cli\u003eOperating temperature: 0℃ to 40℃ \/32 ℉ to 104 ℉ .\u003c\/li\u003e\n\u003cli\u003eRelative humidity: 8% to 80%.\u003c\/li\u003e\n\u003cli\u003eOperating distance: Up to 492 feet\/150 meters outdoors.\u003c\/li\u003e\n\u003cli\u003eIP Class: IP 20\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eManuals\u003c\/h5\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1598\/5171\/files\/Aeotec_Dual_Nano_Switch_Instructions.pdf?10029922550028292431\" target=\"_blank\" title=\"Aeotec Dual Nano Switch \/ with Power Metering Instructions\" rel=\"noopener noreferrer\"\u003eAeotec Dual Nano Switch \/ with Power Metering Instructions\u003c\/a\u003e (Size: 438 KB)\u003cbr\u003e\u003cbr\u003e \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1598\/5171\/files\/Aeotec_Dual_Nano_Switch_Engineering_Sheet.pdf?10029922550028292431\" target=\"_blank\" title=\"Aeotec Dual Nano Switch \/ with Power Metering Engineering Sheet\" rel=\"noopener noreferrer\"\u003eAeotec Dual Nano Switch \/ with Power Metering Engineering Sheet\u003c\/a\u003e (Size: 274 KB)\u003cbr\u003e\u003cbr\u003e \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1598\/5171\/files\/Aeotec_dual_nano_switch_manual.pdf?10029922550028292431\" target=\"_blank\" title=\"Aeotec Dual Nano Switch Quick Start Guide\" rel=\"noopener noreferrer\"\u003eAeotec Dual Nano Switch Quick Start Guide\u003c\/a\u003e (Size: 488 KB)","published_at":"2018-04-03T15:02:20+08:00","created_at":"2017-08-30T12:21:41+08:00","vendor":"Aeotec","type":"Appliances","tags":["Appliances_Ceiling Fan","Appliances_Lighting","Brand_Aeotec","Standard_Z-Wave"],"price":12000,"price_min":12000,"price_max":13000,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":50671523091,"title":"No","option1":"No","option2":null,"option3":null,"sku":"AEO_ZW140","requires_shipping":true,"taxable":true,"featured_image":{"id":2513551655009,"product_id":12247443411,"position":7,"created_at":"2018-04-20T12:29:48+08:00","updated_at":"2018-04-20T12:29:48+08:00","alt":null,"width":608,"height":566,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1598\/5171\/products\/1_79e083e3-f387-446f-a213-6f334349784d.JPG?v=1524198588","variant_ids":[50671523091]},"available":true,"name":"Aeotec Dual Nano Switch - No","public_title":"No","options":["No"],"price":12000,"weight":200,"compare_at_price":null,"inventory_quantity":-2,"inventory_management":null,"inventory_policy":"deny","barcode":"","featured_media":{"alt":null,"id":1376278085729,"position":7,"preview_image":{"aspect_ratio":1.074,"height":566,"width":608,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1598\/5171\/products\/1_79e083e3-f387-446f-a213-6f334349784d.JPG?v=1569158118"}}},{"id":8099714859105,"title":"Yes","option1":"Yes","option2":null,"option3":null,"sku":"AEO_ZW132","requires_shipping":true,"taxable":true,"featured_image":{"id":2513551622241,"product_id":12247443411,"position":6,"created_at":"2018-04-20T12:29:23+08:00","updated_at":"2018-04-20T12:29:23+08:00","alt":null,"width":593,"height":595,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1598\/5171\/products\/1_459b6a4e-b6ed-4e7e-a92e-09c38cf66e27.JPG?v=1524198563","variant_ids":[8099714859105]},"available":true,"name":"Aeotec Dual Nano Switch - Yes","public_title":"Yes","options":["Yes"],"price":13000,"weight":200,"compare_at_price":null,"inventory_quantity":-8,"inventory_management":null,"inventory_policy":"deny","barcode":"","featured_media":{"alt":null,"id":1376278052961,"position":6,"preview_image":{"aspect_ratio":0.997,"height":595,"width":593,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1598\/5171\/products\/1_459b6a4e-b6ed-4e7e-a92e-09c38cf66e27.JPG?v=1569158118"}}}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1598\/5171\/products\/Aeotec_dual_nano_switch_box.png?v=1522738690","\/\/cdn.shopify.com\/s\/files\/1\/1598\/5171\/products\/Aeotec_dual_nano_switch_front.png?v=1522738690","\/\/cdn.shopify.com\/s\/files\/1\/1598\/5171\/products\/Aeotec_dual_nano_switch_bottom.png?v=1522738690","\/\/cdn.shopify.com\/s\/files\/1\/1598\/5171\/products\/Aeotec_dual_nano_switch_back.png?v=1522738690","\/\/cdn.shopify.com\/s\/files\/1\/1598\/5171\/products\/Aeotec_dual_nano_switch_side.png?v=1522738690","\/\/cdn.shopify.com\/s\/files\/1\/1598\/5171\/products\/1_459b6a4e-b6ed-4e7e-a92e-09c38cf66e27.JPG?v=1524198563","\/\/cdn.shopify.com\/s\/files\/1\/1598\/5171\/products\/1_79e083e3-f387-446f-a213-6f334349784d.JPG?v=1524198588"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1598\/5171\/products\/Aeotec_dual_nano_switch_box.png?v=1522738690","options":["Power Metering"],"media":[{"alt":null,"id":1369474498657,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1092,"width":1092,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1598\/5171\/products\/Aeotec_dual_nano_switch_box.png?v=1569156773"},"aspect_ratio":1.0,"height":1092,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1598\/5171\/products\/Aeotec_dual_nano_switch_box.png?v=1569156773","width":1092},{"alt":null,"id":1369474531425,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1092,"width":1092,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1598\/5171\/products\/Aeotec_dual_nano_switch_front.png?v=1569156773"},"aspect_ratio":1.0,"height":1092,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1598\/5171\/products\/Aeotec_dual_nano_switch_front.png?v=1569156773","width":1092},{"alt":null,"id":1369474465889,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1092,"width":1092,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1598\/5171\/products\/Aeotec_dual_nano_switch_bottom.png?v=1569156773"},"aspect_ratio":1.0,"height":1092,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1598\/5171\/products\/Aeotec_dual_nano_switch_bottom.png?v=1569156773","width":1092},{"alt":null,"id":1369474433121,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1092,"width":1092,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1598\/5171\/products\/Aeotec_dual_nano_switch_back.png?v=1569156773"},"aspect_ratio":1.0,"height":1092,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1598\/5171\/products\/Aeotec_dual_nano_switch_back.png?v=1569156773","width":1092},{"alt":null,"id":1369474564193,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1092,"width":1092,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1598\/5171\/products\/Aeotec_dual_nano_switch_side.png?v=1569156773"},"aspect_ratio":1.0,"height":1092,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1598\/5171\/products\/Aeotec_dual_nano_switch_side.png?v=1569156773","width":1092},{"alt":null,"id":1376278052961,"position":6,"preview_image":{"aspect_ratio":0.997,"height":595,"width":593,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1598\/5171\/products\/1_459b6a4e-b6ed-4e7e-a92e-09c38cf66e27.JPG?v=1569158118"},"aspect_ratio":0.997,"height":595,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1598\/5171\/products\/1_459b6a4e-b6ed-4e7e-a92e-09c38cf66e27.JPG?v=1569158118","width":593},{"alt":null,"id":1376278085729,"position":7,"preview_image":{"aspect_ratio":1.074,"height":566,"width":608,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1598\/5171\/products\/1_79e083e3-f387-446f-a213-6f334349784d.JPG?v=1569158118"},"aspect_ratio":1.074,"height":566,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1598\/5171\/products\/1_79e083e3-f387-446f-a213-6f334349784d.JPG?v=1569158118","width":608}],"content":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1598\/5171\/files\/Aeotec_dual_nano_switch_in_hand_medium.jpg?v=1522737596\" alt=\"Aeotec Dual Nano Switch in hand\" style=\"display: block; margin-left: auto; margin-right: auto;\"\u003e\u003c\/p\u003e\n\u003cp style=\"font-size: 2em; color: #4ec8ea; margin-bottom: 25px;\" align=\"center\"\u003eControl any switch and socket wirelessly from anywhere.\u003c\/p\u003e\n\u003cp\u003eAeotec Dual Nano Switch is a low-cost ZWave Switch specifically used to enable Z-Wave command and control (on\/off) of any wall switches. With the Aeotec Dual Nano Switch all switchable and non-dimmable electric installations (e.g. lighting, sockets...) can be integrated into a Z-Wave network. Thus, the connected load can be switched both wirelessly via Z-Wave and locally via existing wall switch. In the event of power failure, non-volatile memory retains all programmed information relating to the unit’s operating status.\u003cbr\u003e\u003cbr\u003eIt can connect to 2 external manual switches to control the load ON\/OFF independently. Its surface has a pin socket, which can be used for connecting to the touch panel, so you can also use the touch panel to control the Dual Nano Switch. The Dual Nano Switch is also a security Z-Wave device and supports Over The Air (OTA) feature for the products firmware upgrade.\u003c\/p\u003e\n\u003ch3\u003eTotal Control\u003c\/h3\u003e\n\u003cp\u003eNano Switch offers total control, easily. Incredibly small, each Nano Switch installs invisibly behind any of your home’s existing switches or power sockets. Simply unscrew the faceplate, install Nano Switch behind it, and you now have complete wireless control. Your old switches are instantly modern and instantly connected.\u003cbr\u003e\u003cbr\u003eInstall Nano Switch behind your wall’s power sockets and you now have wireless control and scheduling of your electronics. With optional power metering, you can reduce how much those electronics are costing you.\u003cbr\u003e\u003cbr\u003eIf you have lighting that doesn’t need dimming, install Nano Switch behind your existing wall switch to convert it to a wireless wall switch. You’ll have full wireless switch control, along with intelligent automation and scheduling via Z-Wave.\u003c\/p\u003e\n\u003ch3\u003eTotal Ability\u003c\/h3\u003e\n\u003cp\u003eOnce installed behind a switch or socket, Nano Switch offers unparalleled wireless control via Z-Wave Plus. It lets you control, automate and monitor your lights and power sockets from anywhere, anytime. And it does it all through enhancement – with Nano Switch, your sockets and switches don’t have to be replaced and they’ll continue to offer the same manual control that you’re used to.\u003c\/p\u003e\n\u003ch3\u003eTotal Home\u003c\/h3\u003e\n\u003cp\u003eNano Switch is a tool that installs in a few minutes. It lets you control, monitor, automate and schedule the electronics in your home. Control the electronics you use every day - your lights, appliances and entertainment systems. There’ll also be the electronics that become a part of your smart home as it grows - security and safety devices, electronics indoors and out. If there’s a reason to automate it, to monitor it or make it responsive, Nano Switch is the invisible, controlling, and responsive touch.\u003c\/p\u003e\n\u003ch3\u003eSafely Small and Controllable from Anywhere\u003c\/h3\u003e\n\u003cp\u003eDual Nano Switch works with your existing switches and sockets and can be easily controlled and scheduled trough the Z-Wave network by a Z-Wave gateway and app. It can also be controlled by other Z-Wave devices such as Aeotec's WallMote.\u003cbr\u003e\u003cbr\u003eBesides its small size that allows your Dual Nano Switch to be installed behind your home’s switches or sockets, Nano Switch also features with In-built surge protection and AES-128 bit wireless encryption.\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003ctable style=\"width: 100%; margin-left: auto; margin-right: auto;\" border=\"0\" cellspacing=\"20\" cellpadding=\"0\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 33.33%; margin-left: 15px;\"\u003e\n\u003ch3 style=\"padding-top: 0px; text-align: center;\"\u003ePowerful control\u003c\/h3\u003e\n\u003cp style=\"padding-top: 0px; padding-right: 30px; text-align: justify;\"\u003eDesigned to control sockets, switches and non-dimming lights powerfully Dual Nano Switch can control up to 10 amps.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 33.33%; margin-left: 5px; margin-right: 5px;\"\u003e\n\u003ch3 style=\"padding-top: 0px; text-align: center;\"\u003eSafer and easier wiring\u003c\/h3\u003e\n\u003cp style=\"padding-top: 0px; padding-left: 10px; padding-right: 10px; text-align: justify;\"\u003eDual Nano Switch only works with switches and outlets that utilise a neutral wire. Thanks to its smaller design, Dual Nano Switch also connects to wires 25% thicker than past models.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 33.33%; margin-left: 15px;\"\u003e\n\u003ch3 style=\"padding-top: 0px; text-align: center;\"\u003eWirelessly updated\u003c\/h3\u003e\n\u003cp style=\"padding-top: 0px; padding-left: 30px; text-align: justify;\"\u003eDual Nano Switch allows for firmware updates to be wirelessly installed via Z-Wave Plus and supports Over The Air (OTA) feature for the products firmware upgrade.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ctable style=\"width: 100%; margin-left: auto; margin-right: auto;\" border=\"0\" cellspacing=\"20\" cellpadding=\"0\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 33.33%; margin-left: 15px;\"\u003e\n\u003ch3 style=\"padding-top: 0px; text-align: center;\"\u003eFull scheduling\u003c\/h3\u003e\n\u003cp style=\"padding-top: 0px; padding-right: 30px; text-align: justify;\"\u003eDual Nano Switch can also be intelligently automated and scheduled to switch on and off on a timer independently, even when your Z-Wave gateway has connection issues.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 33.33%; margin-left: 5px; margin-right: 5px;\"\u003e\n\u003ch3 style=\"padding-top: 0px; text-align: center;\"\u003eSafely small\u003c\/h3\u003e\n\u003cp style=\"padding-top: 0px; padding-left: 10px; padding-right: 10px; text-align: justify;\"\u003eDesigned to fit behind a wall switch without compromising on safety, Dual Nano Switch offers twice the control at only 4.4cm x 4cm x 2.5cm.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 33.33%; margin-left: 15px;\"\u003e\n\u003ch3 style=\"padding-top: 0px; text-align: center;\"\u003eLow voltage also\u003c\/h3\u003e\n\u003cp style=\"padding-top: 0px; padding-left: 30px; text-align: justify;\"\u003eDual Nano Switch is great with high voltage and low voltage. It can be used to control 24VDC electronics such as light strips, alarms, doorbells, and other low-powered devices.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eSpecification\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eModel number: ZW140 \/ ZW132 (Power metering)\u003c\/li\u003e\n\u003cli\u003ePower input: 120VAC to 240VAC, 50Hz to 60Hz.\u003c\/li\u003e\n\u003cli\u003eRated output: 6.5A per channel for resistive load.\u003c\/li\u003e\n\u003cli\u003eTotal current: Max 10A.\u003c\/li\u003e\n\u003cli\u003eMax standby power: 0.8W.\u003c\/li\u003e\n\u003cli\u003eOperating temperature: 0℃ to 40℃ \/32 ℉ to 104 ℉ .\u003c\/li\u003e\n\u003cli\u003eRelative humidity: 8% to 80%.\u003c\/li\u003e\n\u003cli\u003eOperating distance: Up to 492 feet\/150 meters outdoors.\u003c\/li\u003e\n\u003cli\u003eIP Class: IP 20\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eManuals\u003c\/h5\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1598\/5171\/files\/Aeotec_Dual_Nano_Switch_Instructions.pdf?10029922550028292431\" target=\"_blank\" title=\"Aeotec Dual Nano Switch \/ with Power Metering Instructions\" rel=\"noopener noreferrer\"\u003eAeotec Dual Nano Switch \/ with Power Metering Instructions\u003c\/a\u003e (Size: 438 KB)\u003cbr\u003e\u003cbr\u003e \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1598\/5171\/files\/Aeotec_Dual_Nano_Switch_Engineering_Sheet.pdf?10029922550028292431\" target=\"_blank\" title=\"Aeotec Dual Nano Switch \/ with Power Metering Engineering Sheet\" rel=\"noopener noreferrer\"\u003eAeotec Dual Nano Switch \/ with Power Metering Engineering Sheet\u003c\/a\u003e (Size: 274 KB)\u003cbr\u003e\u003cbr\u003e \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1598\/5171\/files\/Aeotec_dual_nano_switch_manual.pdf?10029922550028292431\" target=\"_blank\" title=\"Aeotec Dual Nano Switch Quick Start Guide\" rel=\"noopener noreferrer\"\u003eAeotec Dual Nano Switch Quick Start Guide\u003c\/a\u003e (Size: 488 KB)"}
Quick View
{"id":9960501511,"title":"Swiid Cord Switch","handle":"swiid-cord-switch","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1598\/5171\/files\/Swiid_Cord_Switch_Banner_large.JPG?v=1523769357\" alt=\"Swiid Cord Switch in hand\" style=\"display: block; margin-left: auto; margin-right: auto;\"\u003e\u003c\/p\u003e\n\u003cp\u003eSwiid Cord Switch (SWI_ZCS1) is the first (and at this time still the only) cord switch in the Z -Wave® ecosystem which is small enough to be compared to a regular cord switch. It can be used both manually like any ordinary cord switch and remotely by Z -Wave®.\u003c\/p\u003e\n\u003cp\u003eThe Swiid Cord Switch replaces your existing cord. It can be turned On\/Off like a manual switch or be controlled wirelessly by Z-Wave. It can also be used to directly control other Z-Wave devices on your home automation system.\u003c\/p\u003e\n\u003ch3\u003eLamp Control\u003c\/h3\u003e\n\u003cp\u003eThe SwiidInter Cord switch, is installed into the lamp's cable, replacing any existing cable switch. You can then control the lamp wirelessly via your Z-Wave system, or you can manually control the lamp by pressing the SwiidInter's button. This is ideal for any type of lamp up to 660W.\u003c\/p\u003e\n\u003ch3\u003eZ-Wave Control of other Devices\u003c\/h3\u003e\n\u003cspan style=\"text-decoration: underline;\"\u003eScene Control\u003c\/span\u003e\n\u003cp\u003eThe SwiidInter Cord switch features instant status updates which means that each time the lamp is switched On or Off this is immediately reported to the Z-Wave controller. You can use this to trigger a scene that can then control many devices, start a timer or even send you an alert.\u003c\/p\u003e\n\u003cspan style=\"text-decoration: underline;\"\u003eAssociated Devices\u003c\/span\u003e\n\u003cp\u003eThe Cord switch has two Association groups, each of which can be associated with up to five other Z-Wave devices. This means that the Cord Switch can be used to control other Z-Wave devices such as On\/Off switches, dimmers etc - all from the touch of the SwiidInter's button. The association groups are controlled with a short (group 2) or a long (group 1) press of the SwindInter's button.\u003c\/p\u003e\n\u003cp\u003eBeing able to easily control scenes or other Z-Wave devices make the SwiidInter Cord Switch extremely versatile in controlling local (wired) lamp as well as lots of other devices and events in your system.\u003c\/p\u003e\n\u003cp\u003eThe SwiidInter Cord Switch works with most Z-Wave controllers.\u003c\/p\u003e\n\u003ch5\u003e\u003cstrong\u003eTechnical Specification\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eDevice Type: BINARY POWER SWITCH Power\u003cbr\u003eInput: 230V ± 10% - 50Hz\u003cbr\u003eMax. Power: 660W\u003cbr\u003eEU Norms: EN 61058-2-1:2011 \u0026amp; EN 55015\u003cbr\u003eProtection index: IP20\u003cbr\u003eSize: 84 x 32 x 29 mm\u003cbr\u003eRadio protocol: Z-Wave® (SDK 4.55)\u003cbr\u003eRadio frequency: 868,42 MHz (EU)\u003cbr\u003eTransmission dist.: Max. 30m indoors depending on construction materials\u003cbr\u003eWorking temp: 0 – 40°C\u003cbr\u003eOn\/Off signal: Blue LEDs\u003cbr\u003ePower consumption: \u0026lt; 0,08W\u003c\/p\u003e\n\u003ch5\u003eVideos\u003c\/h5\u003e\n\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/XLCPp5i1x94\" frameborder=\"0\" allow=\"autoplay; encrypted-media\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\n\u003ch5\u003eManuals\u003c\/h5\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1598\/5171\/files\/ZCS-User-s-manual-vBAT2-02.12.2014.pdf?4605099020862641589\" target=\"_blank\" title=\"Swiid Cord Switch User Manual\" rel=\"noopener noreferrer\"\u003eSwiid Cord Switch User Manual\u003c\/a\u003e (Size: 427 kB)","published_at":"2018-04-15T13:23:33+08:00","created_at":"2017-03-01T10:42:52+08:00","vendor":"Swiid","type":"Appliances","tags":["Appliances_Lighting","Brand_Swiid","Standard_Z-Wave"],"price":11000,"price_min":11000,"price_max":11000,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":40084780039,"title":"Black","option1":"Black","option2":null,"option3":null,"sku":"SWD_ZCS1-B","requires_shipping":true,"taxable":false,"featured_image":{"id":2510001930337,"product_id":9960501511,"position":1,"created_at":"2018-04-15T13:20:25+08:00","updated_at":"2018-04-15T13:24:53+08:00","alt":null,"width":1100,"height":1100,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1598\/5171\/products\/Swiid_Cord_Switch_black_angle.png?v=1523769893","variant_ids":[40084780039]},"available":true,"name":"Swiid Cord Switch - Black","public_title":"Black","options":["Black"],"price":11000,"weight":200,"compare_at_price":null,"inventory_quantity":-5,"inventory_management":null,"inventory_policy":"continue","barcode":"","featured_media":{"alt":null,"id":1374714364001,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1100,"width":1100,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1598\/5171\/products\/Swiid_Cord_Switch_black_angle.png?v=1569157783"}}},{"id":40084780167,"title":"Brown","option1":"Brown","option2":null,"option3":null,"sku":"SWD_ZCS1-BR","requires_shipping":true,"taxable":false,"featured_image":{"id":2510002061409,"product_id":9960501511,"position":6,"created_at":"2018-04-15T13:20:29+08:00","updated_at":"2018-04-15T13:24:53+08:00","alt":null,"width":1100,"height":1100,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1598\/5171\/products\/Swiid_Cord_Switch_brown_angle.png?v=1523769893","variant_ids":[40084780167]},"available":true,"name":"Swiid Cord Switch - Brown","public_title":"Brown","options":["Brown"],"price":11000,"weight":200,"compare_at_price":null,"inventory_quantity":1,"inventory_management":null,"inventory_policy":"continue","barcode":"","featured_media":{"alt":null,"id":1374714495073,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1100,"width":1100,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1598\/5171\/products\/Swiid_Cord_Switch_brown_angle.png?v=1569157783"}}},{"id":39722683847,"title":"White","option1":"White","option2":null,"option3":null,"sku":"SWD_ZCS1","requires_shipping":true,"taxable":false,"featured_image":{"id":2510002094177,"product_id":9960501511,"position":5,"created_at":"2018-04-15T13:20:30+08:00","updated_at":"2018-04-15T13:24:53+08:00","alt":null,"width":1100,"height":1100,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1598\/5171\/products\/Swiid_Cord_Switch_white_angle.png?v=1523769893","variant_ids":[39722683847]},"available":true,"name":"Swiid Cord Switch - White","public_title":"White","options":["White"],"price":11000,"weight":200,"compare_at_price":null,"inventory_quantity":-4,"inventory_management":null,"inventory_policy":"continue","barcode":"","featured_media":{"alt":null,"id":1374714527841,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1100,"width":1100,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1598\/5171\/products\/Swiid_Cord_Switch_white_angle.png?v=1569157783"}}}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1598\/5171\/products\/Swiid_Cord_Switch_black_angle.png?v=1523769893","\/\/cdn.shopify.com\/s\/files\/1\/1598\/5171\/products\/Swiid_Cord_Switch_black_front.png?v=1523769893","\/\/cdn.shopify.com\/s\/files\/1\/1598\/5171\/products\/Swiid_Cord_Switch_black_side.png?v=1523769893","\/\/cdn.shopify.com\/s\/files\/1\/1598\/5171\/products\/Swiid_Cord_Switch_black_top.png?v=1523769893","\/\/cdn.shopify.com\/s\/files\/1\/1598\/5171\/products\/Swiid_Cord_Switch_white_angle.png?v=1523769893","\/\/cdn.shopify.com\/s\/files\/1\/1598\/5171\/products\/Swiid_Cord_Switch_brown_angle.png?v=1523769893"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1598\/5171\/products\/Swiid_Cord_Switch_black_angle.png?v=1523769893","options":["Color"],"media":[{"alt":null,"id":1374714364001,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1100,"width":1100,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1598\/5171\/products\/Swiid_Cord_Switch_black_angle.png?v=1569157783"},"aspect_ratio":1.0,"height":1100,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1598\/5171\/products\/Swiid_Cord_Switch_black_angle.png?v=1569157783","width":1100},{"alt":null,"id":1374714396769,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1100,"width":1100,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1598\/5171\/products\/Swiid_Cord_Switch_black_front.png?v=1569157783"},"aspect_ratio":1.0,"height":1100,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1598\/5171\/products\/Swiid_Cord_Switch_black_front.png?v=1569157783","width":1100},{"alt":null,"id":1374714429537,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1100,"width":1100,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1598\/5171\/products\/Swiid_Cord_Switch_black_side.png?v=1569157783"},"aspect_ratio":1.0,"height":1100,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1598\/5171\/products\/Swiid_Cord_Switch_black_side.png?v=1569157783","width":1100},{"alt":null,"id":1374714462305,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1100,"width":1100,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1598\/5171\/products\/Swiid_Cord_Switch_black_top.png?v=1569157783"},"aspect_ratio":1.0,"height":1100,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1598\/5171\/products\/Swiid_Cord_Switch_black_top.png?v=1569157783","width":1100},{"alt":null,"id":1374714527841,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1100,"width":1100,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1598\/5171\/products\/Swiid_Cord_Switch_white_angle.png?v=1569157783"},"aspect_ratio":1.0,"height":1100,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1598\/5171\/products\/Swiid_Cord_Switch_white_angle.png?v=1569157783","width":1100},{"alt":null,"id":1374714495073,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1100,"width":1100,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1598\/5171\/products\/Swiid_Cord_Switch_brown_angle.png?v=1569157783"},"aspect_ratio":1.0,"height":1100,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1598\/5171\/products\/Swiid_Cord_Switch_brown_angle.png?v=1569157783","width":1100}],"content":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1598\/5171\/files\/Swiid_Cord_Switch_Banner_large.JPG?v=1523769357\" alt=\"Swiid Cord Switch in hand\" style=\"display: block; margin-left: auto; margin-right: auto;\"\u003e\u003c\/p\u003e\n\u003cp\u003eSwiid Cord Switch (SWI_ZCS1) is the first (and at this time still the only) cord switch in the Z -Wave® ecosystem which is small enough to be compared to a regular cord switch. It can be used both manually like any ordinary cord switch and remotely by Z -Wave®.\u003c\/p\u003e\n\u003cp\u003eThe Swiid Cord Switch replaces your existing cord. It can be turned On\/Off like a manual switch or be controlled wirelessly by Z-Wave. It can also be used to directly control other Z-Wave devices on your home automation system.\u003c\/p\u003e\n\u003ch3\u003eLamp Control\u003c\/h3\u003e\n\u003cp\u003eThe SwiidInter Cord switch, is installed into the lamp's cable, replacing any existing cable switch. You can then control the lamp wirelessly via your Z-Wave system, or you can manually control the lamp by pressing the SwiidInter's button. This is ideal for any type of lamp up to 660W.\u003c\/p\u003e\n\u003ch3\u003eZ-Wave Control of other Devices\u003c\/h3\u003e\n\u003cspan style=\"text-decoration: underline;\"\u003eScene Control\u003c\/span\u003e\n\u003cp\u003eThe SwiidInter Cord switch features instant status updates which means that each time the lamp is switched On or Off this is immediately reported to the Z-Wave controller. You can use this to trigger a scene that can then control many devices, start a timer or even send you an alert.\u003c\/p\u003e\n\u003cspan style=\"text-decoration: underline;\"\u003eAssociated Devices\u003c\/span\u003e\n\u003cp\u003eThe Cord switch has two Association groups, each of which can be associated with up to five other Z-Wave devices. This means that the Cord Switch can be used to control other Z-Wave devices such as On\/Off switches, dimmers etc - all from the touch of the SwiidInter's button. The association groups are controlled with a short (group 2) or a long (group 1) press of the SwindInter's button.\u003c\/p\u003e\n\u003cp\u003eBeing able to easily control scenes or other Z-Wave devices make the SwiidInter Cord Switch extremely versatile in controlling local (wired) lamp as well as lots of other devices and events in your system.\u003c\/p\u003e\n\u003cp\u003eThe SwiidInter Cord Switch works with most Z-Wave controllers.\u003c\/p\u003e\n\u003ch5\u003e\u003cstrong\u003eTechnical Specification\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eDevice Type: BINARY POWER SWITCH Power\u003cbr\u003eInput: 230V ± 10% - 50Hz\u003cbr\u003eMax. Power: 660W\u003cbr\u003eEU Norms: EN 61058-2-1:2011 \u0026amp; EN 55015\u003cbr\u003eProtection index: IP20\u003cbr\u003eSize: 84 x 32 x 29 mm\u003cbr\u003eRadio protocol: Z-Wave® (SDK 4.55)\u003cbr\u003eRadio frequency: 868,42 MHz (EU)\u003cbr\u003eTransmission dist.: Max. 30m indoors depending on construction materials\u003cbr\u003eWorking temp: 0 – 40°C\u003cbr\u003eOn\/Off signal: Blue LEDs\u003cbr\u003ePower consumption: \u0026lt; 0,08W\u003c\/p\u003e\n\u003ch5\u003eVideos\u003c\/h5\u003e\n\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/XLCPp5i1x94\" frameborder=\"0\" allow=\"autoplay; encrypted-media\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\n\u003ch5\u003eManuals\u003c\/h5\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1598\/5171\/files\/ZCS-User-s-manual-vBAT2-02.12.2014.pdf?4605099020862641589\" target=\"_blank\" title=\"Swiid Cord Switch User Manual\" rel=\"noopener noreferrer\"\u003eSwiid Cord Switch User Manual\u003c\/a\u003e (Size: 427 kB)"}
