ZWave.Me
You may also like:
Hubs
Z-Wave.Me Razberry2
Description The RaZberry Gen 5 turns every Raspberry PI into a Z-Wave Home Automation Gateway. The bundle of hardware and precompiled Z-Wave wireless network management...
Description The RaZberry Gen 5 turns every Raspberry PI into a Z-Wave Home Automation Gateway. T...
In Stock
$105.00
Quick View
{"id":9583491079,"title":"Z-Wave.Me Razberry2","handle":"razberry2","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe RaZberry Gen 5 turns every Raspberry PI into a Z-Wave Home Automation Gateway. The bundle of hardware and precompiled Z-Wave wireless network management software waits to be completed by your own user interface running in a web browser or a mobile phone. The Z-Wave software offers an easy to understand and easy to use interface applying the well-known Java Script interface technology JSON on a built in web server. Writing your own home automation app was never easier and never more affordable. The RaZberry 2 has an optimized antenna, wherewith the module can achieve a range of up to 200 meters.\u003c\/p\u003e\n\u003cp\u003eThe RaZberry consists of four parts: \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eZ-Wave transceiver pluggable to the GPIO interface of the Raspberry PI\u003c\/li\u003e\n\u003cli\u003eOptimized transceiver firmware running on the Z-Wave transceiver chip\u003c\/li\u003e\n\u003cli\u003eCertified Z-Wave communication stack Z-Way - running on the Raspberry PI and offering a web based interface\u003c\/li\u003e\n\u003cli\u003eZ-Way AJAX based demo User Interface for easy access to all Z-Wave functions of Z-Way and as a reference for own User Interface enhancements.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eRaZberry is compatible with old Raspberry Pi Model B as well as with new Model B+. 2 and 3.\u003cbr\u003e\u003cbr\u003ePlease note: The package includes only the Z-Wave plug-on module and the appropriate software. The Raspberry Pi baseboard is NOT included. More information is available on the RaZberry website razberry.z-wave.me.\u003c\/p\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eWireless: Z-Wave 868.4 MHz\u003c\/li\u003e\n\u003cli\u003eWireless Range: Tested for \u0026gt;40m in buildings, up to 100m in free range\u003c\/li\u003e\n\u003cli\u003eDimensions: 40 x 20 mm Wireless Range\u003c\/li\u003e\n\u003cli\u003eWeight is 16 gr.\u003c\/li\u003e\n\u003cli\u003eDisplay: Red LED - Inclusion and Exclusion Mode; Green LED - Send Data Indication\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eManuals\u003c\/h5\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1598\/5171\/files\/RaZberry500_QSG_en1.pdf?15857278007230996867\" target=\"_blank\" title=\"Z-Wave.Me Razberry2 Quick Start Guide\" rel=\"noopener noreferrer\"\u003eZ-Wave.Me Razberry2 Quick Start Guide\u003c\/a\u003e (Size: 3.75 MB)\u003cbr\u003e\u003cbr\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1598\/5171\/files\/RaZberry500_End_User_Manual.pdf?15857278007230996867\" target=\"_blank\" title=\"Z-Wave.Me User Manual\" rel=\"noopener noreferrer\"\u003eZ-Wave.Me User Manual\u003c\/a\u003e (Size: 1.63 MB)\u003cbr\u003e\u003cbr\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1598\/5171\/files\/Z-Way_Developers_Documentation.pdf?15857278007230996867\" target=\"_blank\" title=\"Z-Wave.Me Z-Way Developers Documentation\" rel=\"noopener noreferrer\"\u003eZ-Wave.Me Z-Way Developers Documentation\u003c\/a\u003e (Size: 1.65 MB)\u003cbr\u003e\u003cbr\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1598\/5171\/files\/Z-Way_Home_Automation_User_Interface_Documentation.pdf?15857278007230996867\" target=\"_blank\" title=\"Z-Wave.Me Z-Way Home Automation User Interface Documentation\" rel=\"noopener noreferrer\"\u003eZ-Wave.Me Z-Way Home Automation User Interface Documentation\u003c\/a\u003e (Size: 167 KB)\n\u003ch5\u003eKnown Hardware Issues\u003c\/h5\u003e\n\u003ch4\u003eRaZberry can include and exclude devices, but they are all marked as dead immediately.\u003c\/h4\u003e\n\u003cp\u003eIf your homeId is 0x55555555 and you see in the log:\u003cbr\u003e SETDATA controller.data.homeId = 1431655765 (0x55555555)\u003cbr\u003e You got one of 5rd generation RaZberry that was powered off during self-test process. Z-Wave.Me acknowledges and apologise regarding this problem.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e To solve this, use the below line of javascript code, replace \"IP\" with the IP address of your Z-Way server and paste it into your browser URL:\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e http:\/\/IP:8083\/JS\/Run\/var t = [ 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF ]; for (var i = 0; i \u0026lt; 1000; i++) { zway.NVMExtWriteLongBuffer(i * t.length, t); }\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e (this is a link with JS code inside — paste full line in the browser URL bar!)\u003c\/p\u003e\n\u003cp\u003eAfter this wait for 30 seconds and power off your razberry and power it up again. It will keep lights on for some time (about 5-40 seconds) and go off. After this your homeId will be not 55555555 and Z-Way will be able to include devices and control them.\u003c\/p\u003e","published_at":"2018-04-17T11:44:15+08:00","created_at":"2016-12-22T13:40:46+08:00","vendor":"ZWave.Me","type":"Hubs","tags":["Brand_ZWave.Me","Standard_Z-Wave"],"price":10500,"price_min":10500,"price_max":10500,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":35334713479,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"ZWM_ RAZ2","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"Z-Wave.Me Razberry2","public_title":null,"options":["Default Title"],"price":10500,"weight":100,"compare_at_price":null,"inventory_quantity":1,"inventory_management":null,"inventory_policy":"continue","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1598\/5171\/products\/Razerry2_Front.png?v=1523936545","\/\/cdn.shopify.com\/s\/files\/1\/1598\/5171\/products\/Razerry2_Angle.png?v=1523936545","\/\/cdn.shopify.com\/s\/files\/1\/1598\/5171\/products\/Razberry2_on_Raspberry_Pi.png?v=1523936545"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1598\/5171\/products\/Razerry2_Front.png?v=1523936545","options":["Title"],"media":[{"alt":null,"id":1375173738593,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1100,"width":1100,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1598\/5171\/products\/Razerry2_Front.png?v=1569157874"},"aspect_ratio":1.0,"height":1100,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1598\/5171\/products\/Razerry2_Front.png?v=1569157874","width":1100},{"alt":null,"id":1375173705825,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1100,"width":1100,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1598\/5171\/products\/Razerry2_Angle.png?v=1569157874"},"aspect_ratio":1.0,"height":1100,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1598\/5171\/products\/Razerry2_Angle.png?v=1569157874","width":1100},{"alt":null,"id":1375173673057,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1100,"width":1100,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1598\/5171\/products\/Razberry2_on_Raspberry_Pi.png?v=1569157874"},"aspect_ratio":1.0,"height":1100,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1598\/5171\/products\/Razberry2_on_Raspberry_Pi.png?v=1569157874","width":1100}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cmeta charset=\"utf-8\"\u003e\n\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe RaZberry Gen 5 turns every Raspberry PI into a Z-Wave Home Automation Gateway. The bundle of hardware and precompiled Z-Wave wireless network management software waits to be completed by your own user interface running in a web browser or a mobile phone. The Z-Wave software offers an easy to understand and easy to use interface applying the well-known Java Script interface technology JSON on a built in web server. Writing your own home automation app was never easier and never more affordable. The RaZberry 2 has an optimized antenna, wherewith the module can achieve a range of up to 200 meters.\u003c\/p\u003e\n\u003cp\u003eThe RaZberry consists of four parts: \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eZ-Wave transceiver pluggable to the GPIO interface of the Raspberry PI\u003c\/li\u003e\n\u003cli\u003eOptimized transceiver firmware running on the Z-Wave transceiver chip\u003c\/li\u003e\n\u003cli\u003eCertified Z-Wave communication stack Z-Way - running on the Raspberry PI and offering a web based interface\u003c\/li\u003e\n\u003cli\u003eZ-Way AJAX based demo User Interface for easy access to all Z-Wave functions of Z-Way and as a reference for own User Interface enhancements.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eRaZberry is compatible with old Raspberry Pi Model B as well as with new Model B+. 2 and 3.\u003cbr\u003e\u003cbr\u003ePlease note: The package includes only the Z-Wave plug-on module and the appropriate software. The Raspberry Pi baseboard is NOT included. More information is available on the RaZberry website razberry.z-wave.me.\u003c\/p\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eWireless: Z-Wave 868.4 MHz\u003c\/li\u003e\n\u003cli\u003eWireless Range: Tested for \u0026gt;40m in buildings, up to 100m in free range\u003c\/li\u003e\n\u003cli\u003eDimensions: 40 x 20 mm Wireless Range\u003c\/li\u003e\n\u003cli\u003eWeight is 16 gr.\u003c\/li\u003e\n\u003cli\u003eDisplay: Red LED - Inclusion and Exclusion Mode; Green LED - Send Data Indication\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eManuals\u003c\/h5\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1598\/5171\/files\/RaZberry500_QSG_en1.pdf?15857278007230996867\" target=\"_blank\" title=\"Z-Wave.Me Razberry2 Quick Start Guide\" rel=\"noopener noreferrer\"\u003eZ-Wave.Me Razberry2 Quick Start Guide\u003c\/a\u003e (Size: 3.75 MB)\u003cbr\u003e\u003cbr\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1598\/5171\/files\/RaZberry500_End_User_Manual.pdf?15857278007230996867\" target=\"_blank\" title=\"Z-Wave.Me User Manual\" rel=\"noopener noreferrer\"\u003eZ-Wave.Me User Manual\u003c\/a\u003e (Size: 1.63 MB)\u003cbr\u003e\u003cbr\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1598\/5171\/files\/Z-Way_Developers_Documentation.pdf?15857278007230996867\" target=\"_blank\" title=\"Z-Wave.Me Z-Way Developers Documentation\" rel=\"noopener noreferrer\"\u003eZ-Wave.Me Z-Way Developers Documentation\u003c\/a\u003e (Size: 1.65 MB)\u003cbr\u003e\u003cbr\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1598\/5171\/files\/Z-Way_Home_Automation_User_Interface_Documentation.pdf?15857278007230996867\" target=\"_blank\" title=\"Z-Wave.Me Z-Way Home Automation User Interface Documentation\" rel=\"noopener noreferrer\"\u003eZ-Wave.Me Z-Way Home Automation User Interface Documentation\u003c\/a\u003e (Size: 167 KB)\n\u003ch5\u003eKnown Hardware Issues\u003c\/h5\u003e\n\u003ch4\u003eRaZberry can include and exclude devices, but they are all marked as dead immediately.\u003c\/h4\u003e\n\u003cp\u003eIf your homeId is 0x55555555 and you see in the log:\u003cbr\u003e SETDATA controller.data.homeId = 1431655765 (0x55555555)\u003cbr\u003e You got one of 5rd generation RaZberry that was powered off during self-test process. Z-Wave.Me acknowledges and apologise regarding this problem.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e To solve this, use the below line of javascript code, replace \"IP\" with the IP address of your Z-Way server and paste it into your browser URL:\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e http:\/\/IP:8083\/JS\/Run\/var t = [ 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF ]; for (var i = 0; i \u0026lt; 1000; i++) { zway.NVMExtWriteLongBuffer(i * t.length, t); }\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e (this is a link with JS code inside — paste full line in the browser URL bar!)\u003c\/p\u003e\n\u003cp\u003eAfter this wait for 30 seconds and power off your razberry and power it up again. It will keep lights on for some time (about 5-40 seconds) and go off. After this your homeId will be not 55555555 and Z-Way will be able to include devices and control them.\u003c\/p\u003e"}
You may also like:
Hubs
Z-Wave.Me UZB
Description This USB Stick connects a PC or any other computing platform with USB interface to a wireless Z-Wave network. A controller software compatible to...
Description This USB Stick connects a PC or any other computing platform with USB interface to a...
In Stock
$60.00
Quick View
{"id":9583498119,"title":"Z-Wave.Me UZB","handle":"uzb","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThis USB Stick connects a PC or any other computing platform with USB interface to a wireless Z-Wave network. A controller software compatible to the Sigma Designs Serial API is required to use the functions of the device. This software plus this UZB realize a static controller to manage and use Z-Wave devices of various vendors. This stick works with all certified Z-Wave devices regardless of its vendor or date of origin. The Sigma Designs Serial API specification is available to all owners of a Sigma Designs Z-Wave SDK.\u003c\/p\u003e\n\u003cp\u003eThe device implements a virtual serial interface used by the Z-Wave application. Linux and Mac OSX has a built in device driver for the stick and will create a new device named like \/dev\/cu.usbmodemfa131 (OSX) or \/dev\/ttyACM0 (Linux). Windows enumerates a new COM device but may require a device driver uzb.inf available below.\u003c\/p\u003e\n\u003cp\u003eCompared to the standard firmware design used by almost all Z-Wave USB Sticks and other Z-Wave Host Interface hardware, the UZB firmware offers several extensions and enhancements:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBackup and recovery function including network topology\u003c\/li\u003e\n\u003cli\u003eOptimized transmitting queue handling to speed up transmitting process\u003c\/li\u003e\n\u003cli\u003eFirmware update from the OS level in the field\u003c\/li\u003e\n\u003cli\u003eTrusted Platform module applying strong encryption\u003c\/li\u003e\n\u003cli\u003eExtended Wakeup Notification\u003c\/li\u003e\n\u003cli\u003eHandling to extend battery life time of battery operated devices in the network\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\n\u003cp\u003eThe UZB comes with two versions: UZB1 is the plain stick without any additional software license. It can be used with any third party Z-Wave controller software. UZBWAY is the combination of the UZB stick plus a license key for the Z-Way controller software. Z-Way will always require a Z-Wave.Me hardware to run, either a UZB (with license) or a Razberry board.\u003c\/p\u003e\n\u003ch5\u003eManuals\u003c\/h5\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1598\/5171\/files\/ZMEXUZB1_Manual1.pdf?12191395897609012785\" target=\"_blank\" title=\"Z-Wave.Me UZB User Manual\" rel=\"noopener noreferrer\"\u003eZ-Wave.Me UZB User Manual\u003c\/a\u003e (Size: 973 kB)","published_at":"2018-04-17T11:56:00+08:00","created_at":"2016-12-22T13:42:49+08:00","vendor":"ZWave.Me","type":"Hubs","tags":["Brand_ZWave.Me","Standard_Z-Wave"],"price":6000,"price_min":6000,"price_max":6000,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":35334734855,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"ZWM_ UZB1","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"Z-Wave.Me UZB","public_title":null,"options":["Default Title"],"price":6000,"weight":100,"compare_at_price":null,"inventory_quantity":-3,"inventory_management":null,"inventory_policy":"continue","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1598\/5171\/products\/UZB_Angle.png?v=1523937221","\/\/cdn.shopify.com\/s\/files\/1\/1598\/5171\/products\/UZB_Side.png?v=1523937222"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1598\/5171\/products\/UZB_Angle.png?v=1523937221","options":["Title"],"media":[{"alt":null,"id":1375174066273,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1100,"width":1100,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1598\/5171\/products\/UZB_Angle.png?v=1569157874"},"aspect_ratio":1.0,"height":1100,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1598\/5171\/products\/UZB_Angle.png?v=1569157874","width":1100},{"alt":null,"id":1375174099041,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1100,"width":1100,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1598\/5171\/products\/UZB_Side.png?v=1569157874"},"aspect_ratio":1.0,"height":1100,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1598\/5171\/products\/UZB_Side.png?v=1569157874","width":1100}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cmeta charset=\"utf-8\"\u003e\n\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThis USB Stick connects a PC or any other computing platform with USB interface to a wireless Z-Wave network. A controller software compatible to the Sigma Designs Serial API is required to use the functions of the device. This software plus this UZB realize a static controller to manage and use Z-Wave devices of various vendors. This stick works with all certified Z-Wave devices regardless of its vendor or date of origin. The Sigma Designs Serial API specification is available to all owners of a Sigma Designs Z-Wave SDK.\u003c\/p\u003e\n\u003cp\u003eThe device implements a virtual serial interface used by the Z-Wave application. Linux and Mac OSX has a built in device driver for the stick and will create a new device named like \/dev\/cu.usbmodemfa131 (OSX) or \/dev\/ttyACM0 (Linux). Windows enumerates a new COM device but may require a device driver uzb.inf available below.\u003c\/p\u003e\n\u003cp\u003eCompared to the standard firmware design used by almost all Z-Wave USB Sticks and other Z-Wave Host Interface hardware, the UZB firmware offers several extensions and enhancements:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBackup and recovery function including network topology\u003c\/li\u003e\n\u003cli\u003eOptimized transmitting queue handling to speed up transmitting process\u003c\/li\u003e\n\u003cli\u003eFirmware update from the OS level in the field\u003c\/li\u003e\n\u003cli\u003eTrusted Platform module applying strong encryption\u003c\/li\u003e\n\u003cli\u003eExtended Wakeup Notification\u003c\/li\u003e\n\u003cli\u003eHandling to extend battery life time of battery operated devices in the network\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\n\u003cp\u003eThe UZB comes with two versions: UZB1 is the plain stick without any additional software license. It can be used with any third party Z-Wave controller software. UZBWAY is the combination of the UZB stick plus a license key for the Z-Way controller software. Z-Way will always require a Z-Wave.Me hardware to run, either a UZB (with license) or a Razberry board.\u003c\/p\u003e\n\u003ch5\u003eManuals\u003c\/h5\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1598\/5171\/files\/ZMEXUZB1_Manual1.pdf?12191395897609012785\" target=\"_blank\" title=\"Z-Wave.Me UZB User Manual\" rel=\"noopener noreferrer\"\u003eZ-Wave.Me UZB User Manual\u003c\/a\u003e (Size: 973 kB)"}
You may also like:
Interactive Controls
Z-Wave.Me Wall Controller
Description The Z-Wave.Me Wall Controller is a Z-Wave device that can both control other Z-Wave devices and activate predefined scenes in an IP gateway. Although...
Description The Z-Wave.Me Wall Controller is a Z-Wave device that can both control other Z-Wave ...
In Stock
$75.00
Quick View
{"id":9415766855,"title":"Z-Wave.Me Wall Controller","handle":"zwave-me-wall-controller","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe \u003cspan\u003eZ-Wave.Me Wall Controller\u003c\/span\u003e is a Z-Wave device that can both control other Z-Wave devices and activate predefined scenes in an IP gateway. Although it is controlling other devices, the Wall Controller cannot act as Z-Wave network controller (primary or secondary) and will always need a Z-Wave network controller to be included into a Z-Wave network. The device can be used in different modes that are selected by configuration parameters:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eControl of groups of other Z-Wave devices using 'ON', 'OFF' and Dim commands.\u003c\/li\u003e\n\u003cli\u003eActivation of predefined scenes in Gateways or other Z-Wave devices.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe wall controller must be completed by a mounting frame, the wall switch frame and a rocker. They are not scope of delivery of this device. This device support secure communication when included by a controller that also supports secure communication. The device will then send all commands as secure commands unless the receiving device can not accept them. Then the command is send the normal way automatically. The device will be completed with different designs of wall frame and rockers.\u003c\/p\u003e\n\u003ch5\u003e\n\u003cstrong\u003eSpecifications\u003c\/strong\u003e \u003c\/h5\u003e\n\u003cp\u003e4 Button Configuration:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eButton 1 - Confirmation of re-inclusion or exclusion attempt\u003c\/li\u003e\n\u003cli\u003eButton 2 - Sends node information frame and wake up notification\u003c\/li\u003e\n\u003cli\u003eButton 3 - Factory default reset\u003c\/li\u003e\n\u003cli\u003eButton 4 - Association mode to assign devices to one of the four associations\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eManuals\u003c\/h5\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1598\/5171\/files\/zwaveme_WALLC-S2.pdf?6573931080338660647\" target=\"_blank\" title=\"Z-Wave.Me Wall Controller S2 Quick Start Guide\" rel=\"noopener noreferrer\"\u003eZ-Wave.Me Wall Controller S2 Quick Start Guide\u003c\/a\u003e (Size: 492 KB)","published_at":"2018-04-25T23:17:07+08:00","created_at":"2016-11-18T15:56:19+08:00","vendor":"ZWave.Me","type":"Interactive Controls","tags":["Brand_ZWave.Me","Interactive Controls_Wall Mount","Standard_Z-Wave"],"price":7500,"price_min":7500,"price_max":7500,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":34279603975,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"ZWM_ WALLC-S2","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"Z-Wave.Me Wall Controller","public_title":null,"options":["Default Title"],"price":7500,"weight":100,"compare_at_price":null,"inventory_quantity":0,"inventory_management":null,"inventory_policy":"continue","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1598\/5171\/products\/Wall-C2-Uncovered.png?v=1524669370","\/\/cdn.shopify.com\/s\/files\/1\/1598\/5171\/products\/Wall-C2-Faceplate.png?v=1524669370","\/\/cdn.shopify.com\/s\/files\/1\/1598\/5171\/products\/Wall-C2-Faceplates.png?v=1524669370"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1598\/5171\/products\/Wall-C2-Uncovered.png?v=1524669370","options":["Title"],"media":[{"alt":null,"id":245976727649,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1078,"width":1078,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1598\/5171\/products\/Wall-C2-Uncovered.png?v=1568915925"},"aspect_ratio":1.0,"height":1078,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1598\/5171\/products\/Wall-C2-Uncovered.png?v=1568915925","width":1078},{"alt":null,"id":245976760417,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1078,"width":1078,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1598\/5171\/products\/Wall-C2-Faceplate.png?v=1568915925"},"aspect_ratio":1.0,"height":1078,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1598\/5171\/products\/Wall-C2-Faceplate.png?v=1568915925","width":1078},{"alt":null,"id":245976793185,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1078,"width":1078,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1598\/5171\/products\/Wall-C2-Faceplates.png?v=1568915925"},"aspect_ratio":1.0,"height":1078,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1598\/5171\/products\/Wall-C2-Faceplates.png?v=1568915925","width":1078}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cmeta charset=\"utf-8\"\u003e\n\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe \u003cspan\u003eZ-Wave.Me Wall Controller\u003c\/span\u003e is a Z-Wave device that can both control other Z-Wave devices and activate predefined scenes in an IP gateway. Although it is controlling other devices, the Wall Controller cannot act as Z-Wave network controller (primary or secondary) and will always need a Z-Wave network controller to be included into a Z-Wave network. The device can be used in different modes that are selected by configuration parameters:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eControl of groups of other Z-Wave devices using 'ON', 'OFF' and Dim commands.\u003c\/li\u003e\n\u003cli\u003eActivation of predefined scenes in Gateways or other Z-Wave devices.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe wall controller must be completed by a mounting frame, the wall switch frame and a rocker. They are not scope of delivery of this device. This device support secure communication when included by a controller that also supports secure communication. The device will then send all commands as secure commands unless the receiving device can not accept them. Then the command is send the normal way automatically. The device will be completed with different designs of wall frame and rockers.\u003c\/p\u003e\n\u003ch5\u003e\n\u003cstrong\u003eSpecifications\u003c\/strong\u003e \u003c\/h5\u003e\n\u003cp\u003e4 Button Configuration:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eButton 1 - Confirmation of re-inclusion or exclusion attempt\u003c\/li\u003e\n\u003cli\u003eButton 2 - Sends node information frame and wake up notification\u003c\/li\u003e\n\u003cli\u003eButton 3 - Factory default reset\u003c\/li\u003e\n\u003cli\u003eButton 4 - Association mode to assign devices to one of the four associations\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eManuals\u003c\/h5\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1598\/5171\/files\/zwaveme_WALLC-S2.pdf?6573931080338660647\" target=\"_blank\" title=\"Z-Wave.Me Wall Controller S2 Quick Start Guide\" rel=\"noopener noreferrer\"\u003eZ-Wave.Me Wall Controller S2 Quick Start Guide\u003c\/a\u003e (Size: 492 KB)"}
You may also like:
Hubs
Z-Wave.Me Z-Uno
Description The Z-Wave.Me Z-Uno is the first and only easy to use developer board that allows you to create your own Z-Wave device without deep...
Description The Z-Wave.Me Z-Uno is the first and only easy to use developer board that allows yo...
In Stock
$110.00
Quick View
{"id":9583506887,"title":"Z-Wave.Me Z-Uno","handle":"z-uno","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003ch5\u003e\u003cspan\u003eDescription\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan\u003eThe Z-Wave.Me Z-Uno is the first and only easy to use developer board that allows you to create your own Z-Wave device without deep knowledge of Z-Wave protocol or programming. Z-Uno is a mix of Z-Wave home automation radio protocol power and Arduino simplicity. Being inspired by Arduino project Z-Uno inherits all concepts of easy-to-use hardware and software solutions, keeping maximum flexibility.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eZ-Uno is a fully DIY product. It is made for those who are limited by existing choice of Z-Wave products and wants to extend their smart homes with more sensors and actuators: connect LEDs, buttons, switches, motors or any low voltage sensor including most of Arduino compatible sensors.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eZ-Uno programming is done by writing sketch in simplified C language and loaded into Z-Uno using Arduino IDE. Many examples and comprehensive tutorials will help you to make your own project.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eBeing Z-Wave Plus certified device, Z-Uno is the perfect companion for your RaZberry gateway. Z-Uno is compatible with other controllers too: among them Fibaro Home Center 2\/Lite, Vera Edge and Zipato Zipabox.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eFirst and only easy to use developer board that allows you to create your own Z-Wave device\u003c\/li\u003e\n\u003cli\u003eInspired by Arduino project Z-Uno inherits all concepts of easy-to-use hardware and software solutions\u003c\/li\u003e\n\u003cli\u003eDo-It-Yourself product: Compatible i.a. with LEDs, pushbutton, switch, motors or low voltage sensors\u003c\/li\u003e\n\u003cli\u003eIdeal addition for RaZberry gateway or other controller (e.g. Fibaro Home Center, Zipato Zipabox...)\u003c\/li\u003e\n\u003cli\u003eWireless Technology: Z-Wave Plus\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003ch4\u003eHardware specification\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e28 kB Flash memory for your sketches\u003c\/li\u003e\n\u003cli\u003e2 kB RAM available\u003c\/li\u003e\n\u003cli\u003eZ-Wave RF transmitter at 9.6\/40\/100 kbps\u003c\/li\u003e\n\u003cli\u003e26 GPIO (overlaps with special hardware controllers)\u003c\/li\u003e\n\u003cli\u003e4 ADC\u003c\/li\u003e\n\u003cli\u003e5 PWM\u003c\/li\u003e\n\u003cli\u003e2 UART\u003c\/li\u003e\n\u003cli\u003e1 USB (serial port)\u003c\/li\u003e\n\u003cli\u003e1 SPI (master or slave)\u003c\/li\u003e\n\u003cli\u003e1 Interrupt\u003c\/li\u003e\n\u003cli\u003e2 service LED, 1 service button\u003c\/li\u003e\n\u003cli\u003e1 user test LED\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003ePower modes\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eUSB 5 V, external 5 or 3 V, external 7-18 V or battery (via MU-2F connector, included)\u003c\/li\u003e\n\u003cli\u003ealways on, sleeping or FLiRS (Frequently Listening)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eZ-Wave supported features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eZ-Wave Plus compliant\u003c\/li\u003e\n\u003cli\u003eAvailable in all Z-Wave frequencies\u003c\/li\u003e\n\u003cli\u003eOut of the box support of AES 128 bit Security\u003c\/li\u003e\n\u003cli\u003eUpgrade via USB or radio (Z-Wave OTA)\u003c\/li\u003e\n\u003cli\u003eMultichannel (10 channels)\u003c\/li\u003e\n\u003cli\u003e5 Association groups\u003c\/li\u003e\n\u003cli\u003eControls switches, dimmers, door locks(future feature) and scenes\u003c\/li\u003e\n\u003cli\u003eWorks with gateways and\/or directly with other Z-Wave devices\u003c\/li\u003e\n\u003cli\u003eChannel types: Binary Switch; Multilevel Switch; Colour Switch; Binary Sensor; Multilevel Sensor\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eDimensions\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eL×W×H: 39×20×16 mm (PCB dimensions with all components)\u003c\/li\u003e\n\u003cli\u003eL×W×H: 39×20×7 mm (PCB dimensions with PLS and battery connectors removed)\u003c\/li\u003e\n\u003cli\u003eAntenna lenght: 86 mm (89 mm with isolation), can be bent to better fit your dimensions\u003c\/li\u003e\n\u003cli\u003eWeight: 7 g\u003c\/li\u003e\n\u003cli\u003eAntenna type: wire antenna 86 mm for 865-870 MhZ\u003c\/li\u003e\n\u003cli\u003eAlternative antenna: optional u.fl connector can be soldered (to RF2 pads)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eElectrical characteristics\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eDigital pin in logical 1: \u0026gt; 2.1 V, leakage current 10 μA\u003c\/li\u003e\n\u003cli\u003eDigital pin in logical 0: \u0026lt; 0.9 V, leakage current 10 μA or 40-120 μA (with internal pull-up enabled)\u003c\/li\u003e\n\u003cli\u003eInternal pullup resistor: 15-20 kΩ (at +25°C)\u003c\/li\u003e\n\u003cli\u003eDigital pin out logical 1: \u0026gt; 2.4 V, max current sourcing 8 mA (16 mA for digital pins 3-6)\u003c\/li\u003e\n\u003cli\u003eDigital pin out logical 0: \u0026lt; 0.4 V, max current sinking 8 mA (16 mA for digital pins 3-6)\u003c\/li\u003e\n\u003cli\u003eTotal max current sourcing from GPIO pins: 120 mA\u003c\/li\u003e\n\u003cli\u003ePower consumption on 3.3 V: in always listening mode 50 mA, in sleep mode 1 mA (about 7 μA if one DC-DC is unsoldered), in FLiRS mode 1 mA (about 70 μA if one DC-DC is unsoldered)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eManuals\u003c\/h5\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1598\/5171\/files\/Z-Uno-Quick-Start-Guide.pdf?12136700028968090628\" target=\"_blank\" title=\"Z-Uno Quick Start Guide\" rel=\"noopener noreferrer\"\u003eZ-Uno Quick Start Guide\u003c\/a\u003e (Size: 1.45 MB)","published_at":"2018-04-25T23:04:52+08:00","created_at":"2016-12-22T13:45:25+08:00","vendor":"ZWave.Me","type":"Hubs","tags":["Brand_ZWave.Me","Standard_Z-Wave"],"price":11000,"price_min":11000,"price_max":11000,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":35334761031,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"ZWM_ ZUNO","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"Z-Wave.Me Z-Uno","public_title":null,"options":["Default Title"],"price":11000,"weight":100,"compare_at_price":null,"inventory_quantity":-6,"inventory_management":null,"inventory_policy":"continue","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1598\/5171\/products\/Z-Wave.Me_Z-Uno_Main.png?v=1524668682","\/\/cdn.shopify.com\/s\/files\/1\/1598\/5171\/products\/Z-Wave.Me_Z-Uno_Board.png?v=1524668682"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1598\/5171\/products\/Z-Wave.Me_Z-Uno_Main.png?v=1524668682","options":["Title"],"media":[{"alt":null,"id":1378097102945,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1078,"width":1078,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1598\/5171\/products\/Z-Wave.Me_Z-Uno_Main.png?v=1569158448"},"aspect_ratio":1.0,"height":1078,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1598\/5171\/products\/Z-Wave.Me_Z-Uno_Main.png?v=1569158448","width":1078},{"alt":null,"id":1378097070177,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1078,"width":1078,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1598\/5171\/products\/Z-Wave.Me_Z-Uno_Board.png?v=1569158448"},"aspect_ratio":1.0,"height":1078,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1598\/5171\/products\/Z-Wave.Me_Z-Uno_Board.png?v=1569158448","width":1078}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cmeta charset=\"utf-8\"\u003e\n\u003ch5\u003e\u003cspan\u003eDescription\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan\u003eThe Z-Wave.Me Z-Uno is the first and only easy to use developer board that allows you to create your own Z-Wave device without deep knowledge of Z-Wave protocol or programming. Z-Uno is a mix of Z-Wave home automation radio protocol power and Arduino simplicity. Being inspired by Arduino project Z-Uno inherits all concepts of easy-to-use hardware and software solutions, keeping maximum flexibility.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eZ-Uno is a fully DIY product. It is made for those who are limited by existing choice of Z-Wave products and wants to extend their smart homes with more sensors and actuators: connect LEDs, buttons, switches, motors or any low voltage sensor including most of Arduino compatible sensors.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eZ-Uno programming is done by writing sketch in simplified C language and loaded into Z-Uno using Arduino IDE. Many examples and comprehensive tutorials will help you to make your own project.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eBeing Z-Wave Plus certified device, Z-Uno is the perfect companion for your RaZberry gateway. Z-Uno is compatible with other controllers too: among them Fibaro Home Center 2\/Lite, Vera Edge and Zipato Zipabox.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eFirst and only easy to use developer board that allows you to create your own Z-Wave device\u003c\/li\u003e\n\u003cli\u003eInspired by Arduino project Z-Uno inherits all concepts of easy-to-use hardware and software solutions\u003c\/li\u003e\n\u003cli\u003eDo-It-Yourself product: Compatible i.a. with LEDs, pushbutton, switch, motors or low voltage sensors\u003c\/li\u003e\n\u003cli\u003eIdeal addition for RaZberry gateway or other controller (e.g. Fibaro Home Center, Zipato Zipabox...)\u003c\/li\u003e\n\u003cli\u003eWireless Technology: Z-Wave Plus\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003ch4\u003eHardware specification\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e28 kB Flash memory for your sketches\u003c\/li\u003e\n\u003cli\u003e2 kB RAM available\u003c\/li\u003e\n\u003cli\u003eZ-Wave RF transmitter at 9.6\/40\/100 kbps\u003c\/li\u003e\n\u003cli\u003e26 GPIO (overlaps with special hardware controllers)\u003c\/li\u003e\n\u003cli\u003e4 ADC\u003c\/li\u003e\n\u003cli\u003e5 PWM\u003c\/li\u003e\n\u003cli\u003e2 UART\u003c\/li\u003e\n\u003cli\u003e1 USB (serial port)\u003c\/li\u003e\n\u003cli\u003e1 SPI (master or slave)\u003c\/li\u003e\n\u003cli\u003e1 Interrupt\u003c\/li\u003e\n\u003cli\u003e2 service LED, 1 service button\u003c\/li\u003e\n\u003cli\u003e1 user test LED\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003ePower modes\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eUSB 5 V, external 5 or 3 V, external 7-18 V or battery (via MU-2F connector, included)\u003c\/li\u003e\n\u003cli\u003ealways on, sleeping or FLiRS (Frequently Listening)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eZ-Wave supported features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eZ-Wave Plus compliant\u003c\/li\u003e\n\u003cli\u003eAvailable in all Z-Wave frequencies\u003c\/li\u003e\n\u003cli\u003eOut of the box support of AES 128 bit Security\u003c\/li\u003e\n\u003cli\u003eUpgrade via USB or radio (Z-Wave OTA)\u003c\/li\u003e\n\u003cli\u003eMultichannel (10 channels)\u003c\/li\u003e\n\u003cli\u003e5 Association groups\u003c\/li\u003e\n\u003cli\u003eControls switches, dimmers, door locks(future feature) and scenes\u003c\/li\u003e\n\u003cli\u003eWorks with gateways and\/or directly with other Z-Wave devices\u003c\/li\u003e\n\u003cli\u003eChannel types: Binary Switch; Multilevel Switch; Colour Switch; Binary Sensor; Multilevel Sensor\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eDimensions\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eL×W×H: 39×20×16 mm (PCB dimensions with all components)\u003c\/li\u003e\n\u003cli\u003eL×W×H: 39×20×7 mm (PCB dimensions with PLS and battery connectors removed)\u003c\/li\u003e\n\u003cli\u003eAntenna lenght: 86 mm (89 mm with isolation), can be bent to better fit your dimensions\u003c\/li\u003e\n\u003cli\u003eWeight: 7 g\u003c\/li\u003e\n\u003cli\u003eAntenna type: wire antenna 86 mm for 865-870 MhZ\u003c\/li\u003e\n\u003cli\u003eAlternative antenna: optional u.fl connector can be soldered (to RF2 pads)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eElectrical characteristics\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eDigital pin in logical 1: \u0026gt; 2.1 V, leakage current 10 μA\u003c\/li\u003e\n\u003cli\u003eDigital pin in logical 0: \u0026lt; 0.9 V, leakage current 10 μA or 40-120 μA (with internal pull-up enabled)\u003c\/li\u003e\n\u003cli\u003eInternal pullup resistor: 15-20 kΩ (at +25°C)\u003c\/li\u003e\n\u003cli\u003eDigital pin out logical 1: \u0026gt; 2.4 V, max current sourcing 8 mA (16 mA for digital pins 3-6)\u003c\/li\u003e\n\u003cli\u003eDigital pin out logical 0: \u0026lt; 0.4 V, max current sinking 8 mA (16 mA for digital pins 3-6)\u003c\/li\u003e\n\u003cli\u003eTotal max current sourcing from GPIO pins: 120 mA\u003c\/li\u003e\n\u003cli\u003ePower consumption on 3.3 V: in always listening mode 50 mA, in sleep mode 1 mA (about 7 μA if one DC-DC is unsoldered), in FLiRS mode 1 mA (about 70 μA if one DC-DC is unsoldered)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eManuals\u003c\/h5\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1598\/5171\/files\/Z-Uno-Quick-Start-Guide.pdf?12136700028968090628\" target=\"_blank\" title=\"Z-Uno Quick Start Guide\" rel=\"noopener noreferrer\"\u003eZ-Uno Quick Start Guide\u003c\/a\u003e (Size: 1.45 MB)"}
